Making an Adjustable Try Square is a pretty staight forward build, here are the parts: I chose rosewood for the handle, approx. 4” X 1/12” 1/2” Some brass, 5/16” rod,1/4” rod and 1” flat stock (about 1/16...
|View Tim Dahn's:||home||workshop||projects (47)||blog (27)||reviews (3)||forum topics (52)||buddies (106)||favorites (111)||activity log|
1551 posts in 3167 days
Location: The Shenandoah Valley, Virginia
Woodworking for over 40 years I gained a real appreciation for wood in high school wood shop class. I made a few pieces of furniture back in the 80's, then woodworking was kind of put on hold while my wife and I raised two wonderful daughters. Still working full time and helping raise our two grandchildren now so shop time seems infrequent at times.
-- Good judgement comes from experience and experience comes from poor judgement.
Latest Activity | view all »
|commented on||Shop Tools #23: Luban 101 Handplane||04-18-2017 01:00 AM|
|commented on||Discontinued Drill sharpener was what I needed||04-17-2017 12:31 AM|
|commented on||MULTY POSITION BELT SANDER STAND||04-14-2017 09:49 PM|
|commented on||BELT SANDER ATTACHMENT (VIDEO)||03-26-2017 02:32 AM|
|commented on||Oak and walnut Hal Taylor rocker||03-16-2017 11:19 AM|
|commented on||Oak and walnut Hal Taylor rocker||03-16-2017 12:20 AM|
|commented on||14" Backsaw||03-14-2017 11:04 AM|
|commented on||Chestnut box for the Veritas Plow plane||03-09-2017 02:31 AM|
|replied on||Show the restoration before and after.||03-03-2017 11:14 PM|
|commented on||Epic Failure||03-03-2017 02:55 AM|
|replied on||Gramercy Holdfast length||03-01-2017 10:16 PM|
|replied on||Gramercy Holdfast length||03-01-2017 09:20 PM|
|commented on||Funnel'n'roll... really foolish blog!||02-25-2017 11:16 AM|
|replied on||Millers Falls no 5 restoration questions||02-12-2017 01:56 AM|
|commented on||Mitre slot measuring tool for $12||02-12-2017 01:20 AM|
Latest Projects | view all 47 »
Latest Blog Entries | view all 27 »
This plane has been my favorite tool in the shop, I love the size and weight, it just feels good in the hand. It’s always on my bench and it gets used on every project. Reading on Super Tool it seems to be a WWII era as these models sometime...
A couple of MAFE inspired chisel racks seem to fit nicely on the inside of the left door. Made from cherry, walnut and spalted oak cutoffs. The top rack is not completely filled, so a few spacers on the left side. Rules and misc, lay...
First a couple shots of the finished cabinet with the doors attached. The bench in the background is a good testimony as to my need for a tool cabinet :) The back of the cabinet is solid oak 5/8” thick and I need to account for so...
One third each of Boiled linseed oil, poly-urethane and low odor mineral spirits has become my favorite finish. Here is a great site with a lot of good info Homeshop Finishes That Work. Scroll down to: Finish #4: Sam Maloof’s Finish. I...