LumberJocks

TimberMan's Favorites

  • Advertise with us
View RetiredCoastie's profile

My attempt at a 3D cutting #1: 3D Cutting Board Inspired by SPALM!

01-13-2012 11:14 PM by RetiredCoastie | 21 comments »

Quite awhile ago SPALM posted his project for a 3D cutting board: http://lumberjocks.com/SPalm/blog/17488 the more I followed his progress the more I wanted to build one myself and thanks to SPALM’s ripping jig and his idea I began building. Along the way I found myself in need of various clamping jigs that would make this project as easy and as accurate as possible. The journey begins:I built the ripping jig that Spalm built and ripped my stock with the blade set at 30 deg. using sc...

Read this entry »


View John Fry's profile

Carving a Ball and Claw Foot

05-09-2008 04:58 AM by John Fry | 25 comments »

First I want to thank everyone who visited and responded to my last project blog; A walnut sofa table with Jacobean influences As always, your comments AND critiques are welcome! I recently completed a commissioned wing back chair for a very petite lady. It has a lot of carving detail so I though I would post one of the carving elements as a tutorial because this was almost a “project” of its own. This chair has ball and claw feet on the front legs, and the clients liked the unde...

Read this entry »


View Andy Panko's profile

Building My Roubo Bench #4: Building the Wagon Vise

02-03-2012 05:16 AM by Andy Panko | 9 comments »

I decided to put a wagon vise in my bench. I considered a traditional L-shaped tail vise, and also a twin screw end vise. But I really like the simplicity of a wagon vise. Furthermore, since I’m limited on shop space to the tail end of where my bench will be, I thought a wagon vise would consume the least amount of real estate off of the tail. And finally, a wagon vise seemed like it would be a really cool project to build! I hadn’t planned out the exact dimensions of the v...

Read this entry »


View Paul Stoops's profile

Decked Out Ridgid Model R4511 Table Saw #2: Redesigned Mobile Base

12-24-2011 07:01 AM by Paul Stoops | 8 comments »

The Herculift mobile base supplied with the saw worked well, but it wasted a lot of space under the cabinet: In addition, the heavy (~200#) granite top and cast iron mechanism made the saw feel top heavy and somewhat unstable when moving it, due to the small caster footprint. As others have done, my solution to this condition was to redesign the mobile base with a wider caster footprint: The wider footprint distributed the weight much more evenly and made the saw feel very stabl...

Read this entry »


View MsDebbieP's profile

LJ Gateways #3: Gateways: Tips & Tricks

08-14-2011 02:09 PM by MsDebbieP | 9 comments »

The Gateway Project The goal of this project is to fulfill the request for a “wiki” or “glossary of terms” for the site. Here is the link to the woodworking terminology list. And here is a posting a quick glance at LumberJocks.com site features   

Read this entry »


View poroskywood's profile

Drunken Cutting Boards #1: Drunken Alice in Wonderland Cutting Board

09-10-2009 03:22 AM by poroskywood | 42 comments »

Hey everybody, after a few personal messages here is my version of a how to on a Drunken Checker Board. I of coarse bow to the Chairman of the Board and pay tribute with beer. This is a Off-Checker pattern I call “Drunken Alice in Wonderland” The “serendipitous” nature of this piece is appealing in a far out sort of way. Here Goes… So first I prepare the Material. I am using Hard Maple and Walnut both are surfaced flat and cut 1” x 9” x 14&...

Read this entry »


View John Nixon's profile

The Super Sled #1: Shop Built Tenon Jig

03-23-2009 12:09 PM by John Nixon | 8 comments »

I finished the latest accessory for the Super Sled – the Tenon Jig. It’s pretty darn easy to build. Given the cost of commercial tenon jigs, you could easily make this one with the scrap plywood you have laying around. The Tenon Jig’s features include: - micro adjustment feature- built in scale- unique leveling system For PDF measured drawing of the Super Sled and the Tenon Jig, go to the project page and click on the “Browse This Projects Files” link towards the top:h...

Read this entry »


View justsawin's profile

Workbench Buildup #1: Desmond-Stephan Vise Restoration

01-28-2009 01:20 AM by justsawin | 5 comments »

Not exactly a woodworking project, but will parlay into a workbench project to come. This is an old vise I got from my dad’s shop. I don’t know too much about it, but it says Desmond-Stephan Mfg Co. on the left side and Urbana, Ohio on the right. I restored it to useable condition and will mount it on my new workbench after building it. Before Restoration. A rusted mess! I used an “Electrolytic Rust Removal” process to remove the bulk of the rust. I couldn...

Read this entry »


View David's profile

Crosscut Sled

01-22-2009 08:13 AM by David | 19 comments »

This video features a new crosscut sled built for my shop. Inspiration for this sled came form books in my library and countless Internet searches. This is a simple project for the shop that will increase safety, speed and accuracy of crosscuts on the table saw. Construction is simple with a MDF base, maple fences, Incra Miter Bars and T-Track. The plan file is available for download. Hopefully this will inspire a sled for your shop! David STOP BLOCK DETAIL FRONT FENCE DETAIL

Read this entry »


View SCOTSMAN's profile

my new tool chest built from wood

10-08-2008 08:36 PM by SCOTSMAN | 30 comments »

I thought you might like to see a toolchest I built here it is under construction top and bottom.I built it for my machine shop I hope you like it god bless Alistair

Read this entry »


1 2 next »
12 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase