LumberJocks

Tim Kindrick's Favorites

  • Advertise with us
View Tootles's profile

Box with Inlay lid #1: How not to do a wooden hinge

1084 days ago by Tootles | 0 comments »

I recently posted a project of a box with a wooden hinge where I said ”I wouldn’t do it the same way again”. The best way to explain why is to explain how I did it. Yes, I know there are a lot of other ways of doing this, but I did it this way regardless – call it an experiment if you like. I made my box in a workshop that is part of the local education system. One of the odd constraints that put on me is that I was not allowed to use the table saw – the person in...

Read this entry »


View Allison's profile

Ebonizing; Steel Wool and Vinegar

2153 days ago by Allison | 38 comments »

A few months ago I had read an article about ebonizing wood with steel wool and vinegar. Awhile back I tried this and absolutely nothing happened. I never even tried again. Ebonizing is a stain of sorts I guess. I also have heard there are several ways of doing this. The reason the original article caught my eye was because I sure as hell don’t have the money to buy Ebony (wood), and I am forever wanting or needing dark/black wood for my projects and I do not like to use paint, to the ...

Read this entry »


View Andy's profile

"Palm Box" tutorial

1329 days ago by Andy | 88 comments »

I am very sorry that the tutorial is still down. I lost all the pictures and just have moved on to other things. But the good news is that others have come to the rescue with their own tutorials and are just as good…even better than mine.Here is one by Scott http://lumberjocks.com/projects/58221Andy

Read this entry »


View poroskywood's profile

Drunken Cutting Boards #1: Drunken Alice in Wonderland Cutting Board

1783 days ago by poroskywood | 40 comments »

Hey everybody, after a few personal messages here is my version of a how to on a Drunken Checker Board. I of coarse bow to the Chairman of the Board and pay tribute with beer. This is a Off-Checker pattern I call “Drunken Alice in Wonderland” The “serendipitous” nature of this piece is appealing in a far out sort of way. Here Goes… So first I prepare the Material. I am using Hard Maple and Walnut both are surfaced flat and cut 1” x 9” x 14&...

Read this entry »


View trifern's profile

Liming for a Song

2151 days ago by trifern | 12 comments »

This is a blog requested by Douglas Bordner. Midnight Serenade started as an ordinary piece of straight grain oak. I carved an unusual shape to try and bring some interest to the grain. After shaping and sanding, this piece almost receive a traditional finish. The wood and grain were beautiful, but Douglas had a request that needed to be fulfilled. The next step was to apply two coats of Fiebing’s black leather dye. You could also use this technique to ebonize a piece. I t...

Read this entry »


View eric122's profile

some advice about trying to sell my work

1324 days ago by eric122 | 4 comments »

hello to all lumberjocks i am writting this bilog because i,m hoping to reach out to some of you fellow lumberjocks and get some advice that can help me be secessfull at selling my work. i have been woodworking for over ten years and have made several great projects that i have tried to sell with no success i tried to sell my red palm bookcase for 250.00 no success i tried to sell me cedar chest for 350.00 no success and now i,m trying to sell my quartersawn red oak tv stand for 125.00 no suc...

Read this entry »


View degoose's profile

How to make a endgrain tumbling block butcher block board!

1812 days ago by degoose | 48 comments »

Hi guys ,, I had a request to make a tutorial with regards the endgrain Tumbling Block Design.First off,.., You need to decide the size of the blocks…. for this example I used 1” stock… Or something similar.. actually just over .. once dressed. Set the blade of the table saw to 60 degrees.. a bevel box makes this simpleI use the INCRA fence system so it is easy to rip bevels off side of the blade.Once the bevels are ripped measure the length of the bevel and move the f...

Read this entry »


View dewoodwork's profile

Beautiful end grain cutting boards free project plan

2438 days ago by dewoodwork | 94 comments »

Construct these beautiful end grainCutting boards Hello fellow woodworkers,In the spirit of sharing woodworking knowledge I am writing this tutorial for anyone interested in constructing these beautiful end grain cutting boards. Take a look at the photos of the four styles I have made, or create your own pattern’s and follow the steps I have outlined in this tutorial. Questions and comments are welcome, enjoy. For this board I used maple, walnut, lyptus and purpleheart. White oak, wa...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase