| This blog is written by Tony | 18 entries so far |
-
Workshop Make-Over #6: Lumber storage - a new home
I am updating the workshop again – I need more space, not just for my self, but I now have ...
-
FINISHING #4: MAINTENANCE OF WORK PIECES.
The frequency of which you maintain the work piece depends upon the usage, the type of wood and t...
-
FINISHING #3: Finishing with Wax & Oil Pt 2
Application of Wax on top of another medium. Before we get too much into this part, there are ...
-
FINISHING #2: Finishing with Wax & Oil Pt 1
Wax and Oils are one of the oldest, if not the oldest form of protection for wood and wood produc...
-
FINISHING #1: OVERVIEW
I promised Blake that I would undertake a short series on Finishing techniques – primarily ...
-
Travels #3: An LJs Tale of 2 cities (YVR &SFO) - Part 3 - Rockler and Obi's Visit
Day two: A not too early start, but we were heading to Pleasant Hill, CA, to visit the Rockler ...
-
Travels #2: An LJs Tale of 2 cities (YVR &SFO)- Part 2 – The ISO 9000 inspection of Ms Debbie’s work!
Sorry for the Delay in posting this part – just been so busy since my return – so her...
-
Travels #1: An LJs Tale of 2 cities (YVR &SFO) - Part 1 – There and Back again!
This is the first of two blogs on my visit to Vancouver and San Francisco. This part deals with ...
-
Lattice Cutting board Help
Update: 7 september 2010. As I do not have a lot of spare time for woodworking at the moment, I a...
-
Workshop Make-Over #5: Final Configuration
So the Update in now 85% finished and I think it was worth it. Time will tell, I have to get use...
-
Workshop Make-Over #4: Outfeed Table
It has taken me a little longer than anticipated, isn’t always the way! Anyhow here are the layo...
-
Workshop Make-Over #3: Table Saw update: Pt 1
I am very happy with my DELTA – 36-L3B Left-tilt UNISAW – I changed the Motor last year (wa...
-
Workshop Make-Over #2: Current Shop Layout
I forgot to show the current layout of the shop in the first Blog,, without this information the ...
-
Workshop Make-Over #1: Workbench Update
I have some spare time between projects, so I have decided to make some long-needed changes to th...
-
M7 and the Cherry Tree #3: The concluding Part
So finally I have recovered some energy from lifting those heavy logs on my own – now that summer...
-
M7 and the Cherry Tree #2: Final Day of Cutting with the M7
So the penultimate episode in my saga with the M7. Today I finished cutting all the timber I c...
-
M7 and the Cherry Tree #1: Tree Cutting
So this is the reason I have not been so active on LJ for the last few days. My new neighbours...
-
WIXEY Angle Gauge and Others
Welcome to my first ever blog. This was going to be a series of 3 blogs, but it took so little t...
