LumberJocks

Stickley No. 369 Slant-arm Morris Chair #2: Rough work of quartersawn white oak

  • Advertise with us
Blog entry by TigerTed posted 12-18-2018 01:03 PM 373 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 1: Project start Part 2 of Stickley No. 369 Slant-arm Morris Chair series Part 3: Rough joinery »

I rough cut and milled trying to find best utilization of wood while preserving aesthetics. The core of the legs was 8/4 stock. I insisted that the through tenons not show a glue line.

Because we want ray fleck on all 4 sides of the legs there are 4 laminations. Laminations were cut on the bandsaw tad thick. After all glued up, the legs were rotated around on jointer/bandsaw to center the tenon stock and reach final dimension.

When gluing, I used my bench as a caul. Wax paper underneath prevented sticking to the bench. What a nightmare that would be!

Note that I have stock between legs. When I bandsaw, the mating legs have a perfect match. Also, the cut is more stable and less wood is wasted.



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com