Texcaster's Blog

  • Advertise with us
This blog is written by Texcaster | 27 entries so far

Latest Entry

Dressing A Cupped Bench Top

03-25-2015 01:29 PM by Texcaster | 3 comments »

My bench top cupped, enough that a 3mm MDF packer was needed on the tail vise to plane a short piece. This job has been on the back burner for awhile, today was the day. A storm was forecast for the afternoon, I wanted to have some polish on the bench before the storm. To get the job polish ready was probably about one hour. The outside edges were planed with the grain at a setting of about .35mm, being careful not to plane the tail vise. To cross plane, the setting was about .25mm, again keeping well clear of the tail vise. Cross planed with a # 6 plane until flat. Scraped cross grain once. This is a working surface I can live with. Winding sticks. ...

Read this entry »

Older Entries

View all 27 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics