Bowl from a Board #2: Balance and True up the stock

  • Advertise with us
Blog entry by TerryDowning posted 07-16-2013 08:56 PM 1031 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 1: Getting Started Part 2 of Bowl from a Board series Part 3: Cutting the rings »

Once the disc and waste block glue up are dry it’s time to mount on the lathe.

Remember to check the rotation and clearance by hand before powering up the lathe. If your lathe has adjustable speed, set the speed to its lowest setting.

Balancing the stock is nothing more than scraping the edge of the disc until it is concentric.
Truing the stock is nothing more than some light facing cuts on the front face of the stock.

All ready for the next step.

-- - Terry

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics