Tedstor's Favorites

  • Advertise with us
View Jamie's profile

Delta T2 Fence #5: Before/After Pictures

12-22-2007 05:46 AM by Jamie | 13 comments »

Here are some pictures of the 1952 Craftsman Tablesaw that I have restored and installed a new Delta T2 fence on. I included a before picture so you could see the original fence that was on that thing and also the shape that the saw was in Here is the before picture: Here are the after pictures with the Delta T2 fence installed: The next two pics show closeups of the rails where I had to drill new holes since the existing ones did not line up. I also had to drill 3 new ...

Read this entry »

View Sammy's profile

Installing the Delta T2 (Instructions and Tips)

01-24-2008 04:39 PM by Sammy | 13 comments »

Tools / Materials Used: 7/16” Carbide Tip Drill Bit (Suitable for Metal) – LowesWD-40 – Spray lubricant for drilling – On HandLevel (12”, 24”, 48”) – On Hand5/8” Counter Boring bit (Suitable for Metal) – LowesSquare(s) – On HandPhilips Head Screw Driver – On HandSocket or wrench to fit nuts – On HandClamps (Bar Clamps, C Clamps, Spring Clamps) – On HandDelta T2 30” Fence with Rails – LowesMetal Center Punch or Equivalent – LowesAl...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics