LumberJocks

TNwoodchuck's Favorites

  • Advertise with us
View Lance's profile

Projects #3: Flip Top Cart "Over Built Edition"

449 days ago by Lance | 23 comments »

Finally!!!!! Literally 7 months later I finished the video and project. I have so much more respect for the podcasters and bloggers in our hobby now, OMG this was a lot of work. Hope you enjoy because I think this was my last video from start to finish. Here is my Project link to the Flip Top Cart

Read this entry »


View mafe's profile

Circle router jig BLOG

869 days ago by mafe | 11 comments »

Circle router jigMy version. This is a jig I have seen on the web and here on LJ in several versions, I cooked up my version and added a cheap curtain aluminum T-track so I always can extend to any length simply by buying a longer rod.(I think originally the design comes from a woodworking magazine). Since I had the photos and could see the interest on the post I made this mini blog showing more details for those who want to make one. The layout is a plywood (plywood for concrete for...

Read this entry »


View SWM's profile

Incra Offset Router Table #4: Finishing Touches

1383 days ago by SWM | 1 comment »

I feel like I need a cigar with a big red bow on it! I have almost 6 weeks in this bad boy from design to finish product. It was my excuse to “practice” lots of new (to me) methods and techniques. The drawer fronts were made from MDF and sealed with two coats of Zinnser seal coat. This worked pretty well at smoothing up the rough mdf edges. I chamfered the sides of the drawer faces and painted to match cabinet body. Each drawer was stacked right on top of the other with only a...

Read this entry »


View rance's profile

Disposable KerfMaker

1123 days ago by rance | 31 comments »

Well, yes, the Kerf Maker is a very clever jig. I have a different take on its manufacture. I see a reason to have several, NO, Wait… Why not make them DISPOSABLE? :) I had a need to use one today so why not make one. Here it is:  I used a stick of about 1/2” square pine. Yeah, Pine(or is that Poplar?). And some double sided tape. Cut the stick in half. (I’m kinda protective of my tape. Can ya tell?)  Then stick both halves together with the tape. &n...

Read this entry »


View Lockwatcher's profile

Easy Shop Table

1274 days ago by Lockwatcher | 36 comments »

I started this project after building an assembly table from an issue of Wood Magazine (March 2010). The table was a lot of work (the torsion box top) but the main unit holding the table up was an easy build. That’s when I hit upon the idea of using the same design for a group of extra tables for other uses. I’ve built a number of these already, and am using one as a router table, a miter saw station, and a sharpening station. It is built using standard re-dimensioned co...

Read this entry »


View Blake's profile

Homemade Bandsaw Blade Tension Quick-Release

2349 days ago by Blake | 37 comments »

Grab some popcorn… I made a movie!(Make sure the volume is up… it might be a little quiet) Story:I have been working really hard to tune up my bandsaw lately. I really wanted one of these:...for tensioning and detensioning the blade. But I am at the end of my budget and can’t spend another $150. I had seen pictures of a homemade version in a magazine and decided to make my own. I posted this to try to get ideas. Anyway, this is what I came up with and it works gre...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase