• Advertise with us
Blog entry by THOMRIDER posted 11-25-2013 02:28 AM 2857 reads 0 times favorited 6 comments Add to Favorites Watch

Check out my latest effort


-- Its all about the jigs

6 comments so far

View WhoMe's profile


1564 posts in 3212 days

#1 posted 11-25-2013 05:21 AM

Check what out? no pics or a link is visible

-- I'm not clumsy.. It's just the floor hates me, the tables and chairs are bullies, the wall gets in the way AAANNNDDD table saws BITE my fingers!!!.. - Mike -

View THOMRIDER's profile


104 posts in 3037 days

#2 posted 11-25-2013 10:24 AM

Sorry I will fix this problem. For some reason the embed code isn’t working here, so I posted the link as well.

-- Its all about the jigs

View Bill White's profile (online now)

Bill White

4907 posts in 3929 days

#3 posted 11-25-2013 12:39 PM

Looks good. What about adequate “make up” air flow? Won’t that tight fit restrict the vac?


View Dwain's profile


517 posts in 3828 days

#4 posted 11-25-2013 10:12 PM

I have the same table. Now you have me wanting to do the same thing! Nicely done. I really like the power switch location.

Again, nicely done!

-- When you earnestly believe you can compensate for a lack of skill by doubling your efforts, there is no end to what you CAN'T do

View Bigrock's profile


292 posts in 2931 days

#5 posted 11-26-2013 02:50 AM

Nice job. Does the door let enough air in to allow the Dust Collector to pick up the chips in the router area? Mine did not and I had to add holes in the door at the bottom.

View THOMRIDER's profile


104 posts in 3037 days

#6 posted 11-26-2013 10:53 AM

So far no issues there is open space above the cabinet between the top that pulls air also, as well as the hole on the router plate.

-- Its all about the jigs

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics