LumberJocks

Band Saw Horse

  • Advertise with us
Blog entry by TDSpade posted 07-25-2015 03:56 AM 2757 reads 1 time favorited 5 comments Add to Favorites Watch

About a year and a half ago I posted my band saw horse. I had meant to get back to those interested in the pattern, much sooner than this. It is amazing how time gets away from you. I am new at making videos and it shows. So I can only hope that those that watch it, will find it didn’t waste to much of their time. I consider it a how to video. So I didn’t over speed it up. Just 2x speed during the cutting. So you can still clearly see how and in what order that I cut out the horse.

I did the last cut wrong… Just before the last cut you can see me clearing out the material at the back inside neck of the horse. I usually then back the blade out, turn the horse around, back the blade back into the cut, and then cut my way out. I try to always cut, in such away as to not get my blade trapped behind loose material.

Youtube Link below

https://www.youtube.com/watch?v=0OH9vDon7QU

-- For every expert, there is an equal and opposite expert.



5 comments so far

View stefang's profile

stefang

15512 posts in 2794 days


#1 posted 07-26-2015 04:15 PM

Very nice pattern Terry and a nice how-to video as well.

-- Mike, an American living in Norway.

View jy123's profile

jy123

5 posts in 389 days


#2 posted 11-10-2015 05:39 PM

hi terry I watched your video and bought the pattern and will hopefully make one tonight and I have also got the patterns to make a giraffe and a dolphin swan and reindeer so am on the look out for any other animal patterns and how did you put the horn on to make a unicorn please

thanks jy123

View TDSpade's profile

TDSpade

90 posts in 1876 days


#3 posted 11-11-2015 07:19 AM

I sanded down a 3/16 inch dowel to a point in the drill press and cut a 1/8 inch round tenon on the other side. I then drilled a 1/8 inch hole just below and between the ears with a cordless drill. Then glued in the horn. The horn is just about an inch long counting the tenon.

I have also done the reindeer swan and dolphin. But not the giraffe yet.

And thanks for buying the pattern. Terry

-- For every expert, there is an equal and opposite expert.

View jy123's profile

jy123

5 posts in 389 days


#4 posted 11-11-2015 11:40 AM

hi terry thanks for the info about the unicorn and is the drawing of the pig for the bandsaw or scroll saw if for bandsaw I am interested in obtaining a copy also if you are interested the pattern for the giraffe can be found on jeplans.com and cost about $1.50

thanks again
john

View jy123's profile

jy123

5 posts in 389 days


#5 posted 11-13-2015 10:39 AM

hi Terry Just in case you did not get my message my email address is to send the pig pattern to

hopejrs@googlemail.com

thanks again John

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com