LumberJocks

The Stumpy Nubs Workshop #11: Homemade Biscuits and the ULTIMATE tool cabinet!!!!

  • Advertise with us
Blog entry by StumpyNubs posted 882 days ago 6491 reads 1 time favorited 39 comments Add to Favorites Watch
« Part 10: A night as big as the Oscars! "TUBAFORE" CONTEST RESULTS!!! Part 11 of The Stumpy Nubs Workshop series Part 12: The "Amazing Dovetail Machine" and why are tools so expensive? »

In this episode we unveil our shop-made bench top biscuit joining machine designed for fast, accurate glue-ups… and we begin the “Ultimate Tool Cabinet Build”. Plus, Stumpy gives you a list of things to do with your Sundays now that football season is over…

Here’s some screen shots of the sketchup drawing for the machine. The most difficult part about the build was the mount for the joiner. It took a lot of work to get the design just right. If it’s not right, the movement is not accurate.

The lift adjustment mechanism for the table had to be redesigned a couple of times tool. But I finally found the proper way to address all of the issues that contribute to accurate adjustments.

A set of plans is available in our Etsy store ... check it out and help support our show!

-- It's the best woodworking show since the invention of wood... New episodes at: http://www.stumpynubs.com



39 comments so far

View Roger's profile

Roger

13960 posts in 1389 days


#1 posted 882 days ago

I’m the 1st one here…....... yeee haaaa I haven’t watched it yet, cuz I’m typin this message.. gotta go watch

-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net

View boxcarmarty's profile

boxcarmarty

8911 posts in 945 days


#2 posted 882 days ago

Grab the popcorn Roger, I’m right behind you…..

-- My mind is like lighting, one brilliant flash, then its gone.....

View GMman's profile

GMman

3902 posts in 2283 days


#3 posted 882 days ago

Great video love the way you use the pocket holes.
Thanks

View boxcarmarty's profile

boxcarmarty

8911 posts in 945 days


#4 posted 882 days ago

Great show Stumpy. I have the Kreg PH master set. Use it a bunch and love it…..

-- My mind is like lighting, one brilliant flash, then its gone.....

View Joe Lyddon's profile

Joe Lyddon

7595 posts in 2638 days


#5 posted 882 days ago

... heck… I commented on the other thread… Why have it in two places?!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View Sanman's profile

Sanman

78 posts in 943 days


#6 posted 882 days ago

The best part is now I feel like I could do this, thanks.

-- I'll get it done when I get a-round-tuit.

View StumpyNubs's profile

StumpyNubs

6071 posts in 1386 days


#7 posted 882 days ago

It’s actually in three places on LJ’s, Joe, as well as several other sites…

On LJs, this is classified as a blog, and so it shows up in the blog section. But since it has a video in it, it also automatically shows up in the video section. I don’t control that. This time I also added it to the forum thread where people have been following my videos. That is not a new thread started for this video, it is the old contest thread that we have continued to chat on, so I have been using it to update the happenings on the show until the time comes for another contest.

You can comment on all of them, one of them, or none at all. Your call!

-- It's the best woodworking show since the invention of wood... New episodes at: http://www.stumpynubs.com

View DIYaholic's profile

DIYaholic

12617 posts in 1260 days


#8 posted 882 days ago

Apparently I’m not here, I’m there (Old Contest Thread). But I was told; ‘You can’t there from here!”

Great video!

-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procratination a bad thing?

View Joe Lyddon's profile

Joe Lyddon

7595 posts in 2638 days


#9 posted 882 days ago

Fine.

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View yrob's profile

yrob

338 posts in 2238 days


#10 posted 882 days ago

Nice show. This biscuit jointer contraption is very interesting.

-- Yves

View Dave's profile

Dave

11134 posts in 1425 days


#11 posted 882 days ago

I liked it a lot I hope to see it at the next Cannes Festaval

-- Superdav "No matter where you go - there you are." http://chiselandforge.com

View 559dustdesigns's profile

559dustdesigns

632 posts in 1753 days


#12 posted 882 days ago

I really like your biscuit joiner machine.
Keep up the great posts here, I really enjoyed this one.
Thanks for sharing.

-- Aaron - central California "If you haven't got the time to do it right, when will you find the time to do it over?"

View Don Johnson's profile

Don Johnson

597 posts in 1366 days


#13 posted 882 days ago

Another enjoyable Saturday morning with Stumpy (and Steve) – beats going out in the freezing cold workshop!

You’ve really got video production nailed now, Stumpy, you may have a totally new career opening up as a TV presenter!

As someone who doesn’t have hundreds of clamps, the pocket screw system will be added to ‘pop in a few brads to hold it whilst gluing’ technique.

But the feature I liked most about this video was the height adjustment for the biscuit joiner jig using screw-driven wedges. Simple when you see it, but cleverly conceived, and probably very accurate.

-- Don, Somerset UK, http://www.donjohnson24.co.uk

View Jamie Speirs's profile

Jamie Speirs

4067 posts in 1442 days


#14 posted 882 days ago

Great ideas and it all makes me smile.

Jamie

-- Who is the happiest of men? He who values the merits of others, and in their pleasure takes joy, even as though 'twere his own. --Johann Wolfgang von Goethe

View Bob A in NJ's profile

Bob A in NJ

1145 posts in 2584 days


#15 posted 882 days ago

Stumpy, your shows are getting better and better. The new biscuit machine is a great idea. Looking forward to the tool box build. Keep up the good work.

-- Bob A in NJ

showing 1 through 15 of 39 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase