LumberJocks

Clamp storage racks

  • Advertise with us
Blog entry by Stevinmarin posted 01-18-2013 06:51 PM 4435 reads 7 times favorited 20 comments Add to Favorites Watch

Here are a few methods for storing clamps in your shop.

Download free SketchUp and PDF plans for this project.



-- Entertainment for mere mortal woodworkers. http://www.WoodworkingForMereMortals.com



20 comments so far

View Jamie Speirs's profile

Jamie Speirs

4163 posts in 1611 days


#1 posted 01-18-2013 07:02 PM

Steve that works really well, I have a similar space that I
under use for my straight edges. I’m off to measure
Again another great project with plenty of smile factor

Jamie

-- Who is the happiest of men? He who values the merits of others, and in their pleasure takes joy, even as though 'twere his own. --Johann Wolfgang von Goethe

View grizzman's profile

grizzman

7193 posts in 2058 days


#2 posted 01-18-2013 07:10 PM

very good, i like them…and i also want to apply for the cleaning boy job, i will do this for free, i just ask you help me with the gas, im only in alabama, so i figure i can do the cleaning once a 2 times a week, as it takes about 5 days to get there, i know this might feel like an extreme drive, but i do a really good job of cleaning…so what do you think…my mom said i could…:)

-- GRIZZMAN ...[''''']

View rance's profile

rance

4149 posts in 1915 days


#3 posted 01-18-2013 07:12 PM

Another entertaining video. Some nice ideas too.

-- Backer boards, stop blocks, build oversized, and never buy a hand plane--

View sandhill's profile

sandhill

2128 posts in 2679 days


#4 posted 01-18-2013 07:16 PM

I like your layout better then mine maybe Ill change.

View Bob817's profile

Bob817

653 posts in 1137 days


#5 posted 01-18-2013 07:24 PM

That was a great video with some very good info….... I can help out Grizzman if he picks me up along the way ;)

-- ~ Bob ~ Newton, N.H.

View grizzman's profile

grizzman

7193 posts in 2058 days


#6 posted 01-18-2013 07:35 PM

well i got all excited cus of bob817 i thought he could clean the high parts and i would do the low, but man he is in the opposite direction , so that might not work…well unless you want it to work, ill gladly go a different rout to get there…and then we could all do a video together, we could do like a keystone cop type of show…oh i have some great ideas, get back to us steve, i can pack now..and im pretty sure bob817 would be ready by the time i get there..if anyone else wants to help clean, we can just get a bus, well steve would have to get the bus, but its all doable…

-- GRIZZMAN ...[''''']

View Brandon's profile

Brandon

4145 posts in 1706 days


#7 posted 01-18-2013 07:35 PM

Nice one, Steve. I really liked the pipe clamp storage. Mine are in a similar holder as your old one. Time to upgrade. Plus yours it better because you can probably double them up in each spot in case you get more clamps. You know what they say about never owning enough cl…. oh never mind.

-- "hold fast to that which is good"

View AJswoodshop's profile

AJswoodshop

1057 posts in 1031 days


#8 posted 01-18-2013 09:23 PM

That looks cool! I like the bluegrass music too!

View Monte Pittman's profile

Monte Pittman

15540 posts in 1093 days


#9 posted 01-18-2013 10:14 PM

Good job Steve.

-- Mother Nature created it, I just assemble it.

View whitebeast88's profile

whitebeast88

3613 posts in 945 days


#10 posted 01-19-2013 12:55 AM

nice clamp racks thanks for the video

-- Marty.Athens,AL

View Dennisgrosen's profile

Dennisgrosen

10850 posts in 1870 days


#11 posted 01-19-2013 01:01 AM

if you have a clamprack you might be a woodworker :-)
thank Steve for the reminder of the often unused space behind the door

Dennis

View JohnInHadley's profile

JohnInHadley

22 posts in 749 days


#12 posted 01-19-2013 01:07 AM

Hi Steve. I finally joined over here at LumberJocks and posted my first blog entry (still awaiting review and approval at this writing). I have a question about the video. Where do you store the clamps that you used on the plywood at the beginning of the build?
John In Hadley

View Bob Kollman's profile

Bob Kollman

1797 posts in 1946 days


#13 posted 01-19-2013 06:47 AM

Nice set up….Steve, you need more clamps :)

-- Bob Kenosha Wi.

View pickpapa's profile

pickpapa

128 posts in 1415 days


#14 posted 01-19-2013 03:17 PM

Of all the goofy things you have posted here, this is a keeper! Great planning!

-- Chuck.. aka Pickpapa`'`'`'`'`'` The Son is the radiance of God's glory and the exact representation of His being, sustaining all things by His powerful word. Heb. 1:3

View NormG's profile

NormG

4566 posts in 1759 days


#15 posted 01-19-2013 05:02 PM

Great job as always Steve

-- Norman

showing 1 through 15 of 20 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase