| This blog is written by Stephenw | 11 entries so far |
-
Bandsaw Modifications
My bandsaw had no dust collection port. I bolted a shop vacuüm nozzle to the lower wheel cove...
-
My Toddler Builds a Toolbox
I cut the parts for him from pine. If you look closely at the picture, you can see that I als...
-
Woodworking at Three
My three-year old cuts a board.
-
Finished Harbor Freight Bandsaw Restoration
More pictures and information on my blog… http://shopngarage.com/2012/05/central-m...
-
Titanic Model
My son’s first wood project. http://shopngarage.com/2012/05/titanic-model/
-
Harbor Freight Bandsaw Restoration
The base. Before… After…
-
Drill Press Tramming Jig
I made this jig to adjust the drill press table perpendicular to the quill. ...
-
My First Hand Plane "Restoration"
More of a “tune-up” than a restoration. The story on my blog… http://shopnga...
-
Harbor Freight 10" x 18" Lathe
I got my first lathe… http://shopngarage.com/2012/02/harbor-freight-10-x-18-wood-lathe/
-
Industrial Look Coffee Table
of wood and steel…
-
Child's Folding Workbench
I built a miniature folding workbench for my boys. This little bench stands at 21 inches high. ...
