Cornhole Board Tutorial #5: Finishing the boards
This post will show you the way I finish the boards. I will not be painting these yet but I have included a link at the bottom for customization help. I just want to show you how to build the boards and prepare them for paint or stain. The first step in finishing the boards is flush trimming the plywood to the frame. If you don’t have a flush trim bit, you can just sand it down if it’s not too far off. I also like to adjust my flush bit to smooth out the inside of the hole. Once the sides are flush, you can use a round over bit in your router, or just sand the sides down to a smooth curve. Do the plywood and the bottom of the frame, on the outside only. Curving...
