Stephen Fields's Blog

  • Advertise with us
This blog is written by Stephen Fields | 5 entries so far

Latest Entry

Small Painter's Cabinet #4: Cutting the sides to proper dimension

06-20-2008 01:48 AM by Stephen Fields | 4 comments »

Like I said earlier, I accidentally set up the table saw with a dado blade before I realized that I had neglected to cut the sides to length. Since the template I am using is based on the dadoes being the correct length, I had to remove the dado stack and put in the normal blade. When I perform cross cuts, I use a sled. This is particularly important when I need to cut many pieces to the same length. Here is a picture of the first side sitting on my cross cut sled. (Note: This is version 2. There are already plans to build a new third version using the Kreg Precision Measuring System. This will be a topic for a new series.) I have already squared off one edge of the side and am ...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics