|View Stargazer's:||home||workshop||projects (0)||blog (0)||reviews (0)||forum topics (5)||buddies (0)||favorites (0)||activity log|
|12-20-2012 01:16 AM||
Sealing Smelly Wood - 5 replies
Not sure if this is the right place to ask this but here goes. While remodeling a kitchen I had to cut out a piece of 1st floor ceiling rock to replace it due to water damage. After I cut out about a 3×6 piece a cascade of rat droppings rained out of the ceiling. And the smell…....................P-U !!!! There were tunnnels running t...
|11-14-2012 02:12 PM||
Weak Porter Cable Router - 6 replies
I recently purchased a used PC 7529 router off feebay for more than I shoiuld have paid. The router looked close to new and I gave the jackass $165 for it. I tested it at first and it ran so I assumed all was well. After the return period was over I finally needed to use the thing and it is so weak it barely routes a dado in soft maple. My 69...
|12-20-2011 07:10 PM||
Powermatic 15" Planer Overhaul - 1 reply
Had the chip breaker come loose and jam in the planer and there was no way to get to it without removing the head. So I took the head off and took it mostly apart to clean and lube everything. I cleaned off all the rust, dust and gunk from the entire planer and most importantly I made all the adjustments it needed really bad. It was so far out i...
|05-14-2010 03:27 PM||
Comments on Delta 18/36 Drum Sander - 5 replies
I bought one of these sanders after reading less than favorable reviews, but I figured if I took my time I could make it work. And it was the only one I could afford. At first everything I tried to sand turned out to be a disaster. The conveyor would stall and ruin the piece, the paper would clog and burn the wood (delightful smell), and forg...
|05-10-2010 04:38 PM||
New Member - 4 replies
Hi All, I just joined the site yesterday and I want to thank all that emailed me a warm welcome. You don’t see that kind of stuff on other sites. I have a small cabinet/carpenter business here in Pensacola, FL that I do mainly custom cabinets, refacing, installation and trim carpentry. I’ve been in construction my whole working...