LumberJocks

For Sale

  • Advertise with us
Blog series by Smitty_Cabinetshop updated 02-03-2016 02:06 PM 7 parts 11113 reads 23 comments total

Part 1: Perfect Handle Screwdriver Set [SOLD]

01-25-2014 02:41 AM by Smitty_Cabinetshop | 5 comments »

Time to pass along tools that I’m not using, here goes. Five piece set, pictured below. Largest around 19” long, then 11”, then about 8” and a couple short / small ones for good measure. Two smalls are marked Germany, no marks on the others I can readily see. Scales firmly in place, with one of the five obviously needing a bit of refurb to look like the others. I’d like $32.50 for the entire set, plus shipping (actual cost) to the lower 48; money order ...

Read this entry »


Part 2: Stanley #5 T14 SW Jack Plane (SOLD)

02-14-2014 02:17 AM by Smitty_Cabinetshop | 4 comments »

An original condition Type 14 Stanley with partial decal on the tote. With five jack planes in line as users before this one, it has to go. Apology is the tote; it’s thin at the horn as shown in the pics. Near-full SW iron. $80 shipped, it will be carefully packaged with sharp iron, ready to use. This plane was purchased a couple years ago from Walt Q in ‘as -is’ condition. I’m asking less than I paid for it then. PM if interested. No takers,...

Read this entry »


Part 3: Vintage clamshell jointer [SOLD]

02-15-2014 07:21 PM by Smitty_Cabinetshop | 6 comments »

If you know what this is, you know if you need one. Very original, no frozen or replacement bolts, file not included. $8 plus shipping and it’s yours. I have another, don’t need two. PM if interested, thanks!

Read this entry »


Part 4: Stanley #50 Plough Plane [SOLD]

02-15-2014 11:33 PM by Smitty_Cabinetshop | 0 comments »

I have a #50 and love it, but do not need two. This one is the latest US-made ‘type’ of this model plough, and features 16 of the 17 irons that came with it originally; only the 7/16” plow iron is MIA. Visible in the first picture is the plane with intact (not cracked or repaired) rosewood tote, box of cutters and chip breaker (on the bench). Cutters are half beaders, half plough irons and one tongue cutter (that matches to one plough for T&G joinery). Aside from ...

Read this entry »


Part 5: Beading Stop for Stanley #45 - SOLD

02-03-2016 01:48 PM by Smitty_Cabinetshop | 1 comment »

Price lowered. Won’t mess with it for less than $12 shipped, and it’s a fair price at that. This oft-missing part came with a recent eBay purchase and I don’t need it. PM if interested, thanks.

Read this entry »


Part 6: Cutters for Stanley #46 - SOLD

02-03-2016 01:53 PM by Smitty_Cabinetshop | 5 comments »

Hello. I have a couple of extra cutters for the Stanley #46 skew plough, a 1/4” and a 5/8”. I’d like $18 “Shipped” for these two cutters, it’s a package deal. PM if interested, thanks.

Read this entry »


Part 7: Stanley #50 Parts - SOLD

02-03-2016 02:06 PM by Smitty_Cabinetshop | 2 comments »

A revised Offering to get this stuff gone, okay? Pictured are parts for a Stanley #50: The main body; one cutter; the body ‘bolt’ that usually has a wing nut attached; and a one-wingnut fence. I’d like $12 PLUS SHIPPING for everything -one money for all- and it’s yours. PM if interested, thanks.

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com