LumberJocks Woodworking Forum banner

For Sale

15K views 29 replies 11 participants last post by  realcowtown_eric 
#1 ·
Perfect Handle Screwdriver Set [SOLD]

Time to pass along tools that I'm not using, here goes.

Five piece set, pictured below. Largest around 19" long, then 11", then about 8" and a couple short / small ones for good measure. Two smalls are marked Germany, no marks on the others I can readily see. Scales firmly in place, with one of the five obviously needing a bit of refurb to look like the others.



I'd like $32.50 for the entire set, plus shipping (actual cost) to the lower 48; money order is preferred. Send PM if interested, negotiable within reason, and I'll mark SOLD when the set it gone. Thanks for looking!
 
See less See more
1
#7 ·
Stanley #5 T14 SW Jack Plane (SOLD)

An original condition Type 14 Stanley with partial decal on the tote. With five jack planes in line as users before this one, it has to go. Apology is the tote; it's thin at the horn as shown in the pics.

Wood Hand tool Tool Composite material Metalworking hand tool


Wood Gas Metal Fashion accessory Fastener


Wood Musical instrument Material property Shotgun Personal protective equipment


Wood Rectangle Hardwood Tints and shades Flooring


Hand tool Wood Tool Pipe wrench Metalworking hand tool


Wood Table Wood stain Gas Hardwood


Near-full SW iron. $80 shipped, it will be carefully packaged with sharp iron, ready to use. This plane was purchased a couple years ago from Walt Q in 'as -is' condition. I'm asking less than I paid for it then. PM if interested. No takers, it's headed towards flea bay…
 

Attachments

#8 ·
Stanley #5 T14 SW Jack Plane (SOLD)

An original condition Type 14 Stanley with partial decal on the tote. With five jack planes in line as users before this one, it has to go. Apology is the tote; it's thin at the horn as shown in the pics.

Wood Hand tool Tool Composite material Metalworking hand tool


Wood Gas Metal Fashion accessory Fastener


Wood Musical instrument Material property Shotgun Personal protective equipment


Wood Rectangle Hardwood Tints and shades Flooring


Hand tool Wood Tool Pipe wrench Metalworking hand tool


Wood Table Wood stain Gas Hardwood


Near-full SW iron. $80 shipped, it will be carefully packaged with sharp iron, ready to use. This plane was purchased a couple years ago from Walt Q in 'as -is' condition. I'm asking less than I paid for it then. PM if interested. No takers, it's headed towards flea bay…
I saw #2 and jumped! darn…just a #5. still, a nice one.
If that price includes shipping, that's not a bad deal. They're really getting a good buck on E Bay these days.

Like you, I have 5 of them in different types and conditions.

Got a mint 112 or a 289? I buy 8s all day long.

wait…..********************, I still have 5 weeks to go.
Wifey poo grounded me for two months from buying on E bay after that last 275.00 unapproved sporadic splurge.
 

Attachments

#12 ·
Vintage clamshell jointer [SOLD]

If you know what this is, you know if you need one. Very original, no frozen or replacement bolts, file not included. $8 plus shipping and it's yours. I have another, don't need two.

Wood Shoulder plane Smoothing plane Plane Hand tool


PM if interested, thanks!
 

Attachments

#19 ·
Stanley #50 Plough Plane [SOLD]

I have a #50 and love it, but do not need two. This one is the latest US-made 'type' of this model plough, and features 16 of the 17 irons that came with it originally; only the 7/16" plow iron is MIA. Visible in the first picture is the plane with intact (not cracked or repaired) rosewood tote, box of cutters and chip breaker (on the bench). Cutters are half beaders, half plough irons and one tongue cutter (that matches to one plough for T&G joinery).

Hand tool Saw Tool Metalworking hand tool Wood


Aside from one missing cutter, there is a depth stop that's also absent. the good news is the long depth stop is present and can be used in the place of the missing one. Here's that long depth stop in it's normal position:

Wood Gas Tool Musical instrument accessory Metal


Here it is in place on the outside of the main body of the plane, serving as a depth stop. You can also see the spurs in their stowed position in this pic.

Wood Tool Household hardware Screw Metal


One of the features of this later model plane is the depth adjust lever ala the Venerable #78 plane. Loosen up the inside fence just a bit and the lever definitely helps set the iron to the proper depth.

Wood Art Auto part Metal Gear


The plane irons have not been 'messed with' and all will ship to you as seen. Send me a PM if interested, I'm asking $75 plus shipping. I really like my #50 and consider it a better alternative to the #45 because it is a simpler plane to setup and is lighter in weight. For dado cuts for drawer bottoms it can't be beat. Thanks for looking!

Automotive tire Wood Motor vehicle Bumper Bicycle part
 

Attachments

#20 ·
Beading Stop for Stanley #45 - SOLD

Price lowered. Won't mess with it for less than $12 shipped, and it's a fair price at that.

This oft-missing part came with a recent eBay purchase and I don't need it. PM if interested, thanks.

Wood Brick Material property Hardwood Gas


Brown Wood Wood stain Hardwood Rectangle


Wood Wood stain Hardwood Varnish Font


Wood Wood stain Hardwood Font Flooring
 

Attachments

#21 ·
Beading Stop for Stanley #45 - SOLD

Price lowered. Won't mess with it for less than $12 shipped, and it's a fair price at that.

This oft-missing part came with a recent eBay purchase and I don't need it. PM if interested, thanks.

Wood Brick Material property Hardwood Gas


Brown Wood Wood stain Hardwood Rectangle


Wood Wood stain Hardwood Varnish Font


Wood Wood stain Hardwood Font Flooring
Low(est) price, thanks for looking.
 

Attachments

#22 ·
Cutters for Stanley #46 - SOLD

Hello. I have a couple of extra cutters for the Stanley #46 skew plough, a 1/4" and a 5/8".

Wood Rectangle Font Road surface Wood stain


Brown Wood Rectangle Wood stain Font


Wood Knife Blade Tableware Kitchen utensil


I'd like $18 "Shipped" for these two cutters, it's a package deal. PM if interested, thanks.
 

Attachments

#23 ·
Cutters for Stanley #46 - SOLD

Hello. I have a couple of extra cutters for the Stanley #46 skew plough, a 1/4" and a 5/8".

Wood Rectangle Font Road surface Wood stain


Brown Wood Rectangle Wood stain Font


Wood Knife Blade Tableware Kitchen utensil


I'd like $18 "Shipped" for these two cutters, it's a package deal. PM if interested, thanks.
Sale pending.
 

Attachments

#28 ·
Stanley #50 Parts - SOLD

A revised Offering to get this stuff gone, okay? Pictured are parts for a Stanley #50: The main body; one cutter; the body 'bolt' that usually has a wing nut attached; and a one-wingnut fence.

Wood Household hardware Gas Metal Fixture


Wood Trigger Gun barrel Wood stain Gun accessory


Wood Art Hardwood Wood stain Font


Wood Household hardware Metal Hardwood Fashion accessory


Wood Hardwood Wood stain Pattern Metal


Hand tool Wood Metalworking hand tool Household hardware Tool


Hand tool Tool Wood Metalworking hand tool Household hardware


I'd like $12 PLUS SHIPPING for everything -one money for all- and it's yours.

PM if interested, thanks.
 

Attachments

#29 ·
Stanley #50 Parts - SOLD

A revised Offering to get this stuff gone, okay? Pictured are parts for a Stanley #50: The main body; one cutter; the body 'bolt' that usually has a wing nut attached; and a one-wingnut fence.

Wood Household hardware Gas Metal Fixture


Wood Trigger Gun barrel Wood stain Gun accessory


Wood Art Hardwood Wood stain Font


Wood Household hardware Metal Hardwood Fashion accessory


Wood Hardwood Wood stain Pattern Metal


Hand tool Wood Metalworking hand tool Household hardware Tool


Hand tool Tool Wood Metalworking hand tool Household hardware


I'd like $12 PLUS SHIPPING for everything -one money for all- and it's yours.

PM if interested, thanks.
All parts, one money, lower price. Hope to find a good home, PM with any questions or offers.
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top