LumberJocks

Wood Lathe Router Guide

  • Advertise with us
Blog series by Jim Jakosh updated 717 days ago 1 part 5148 reads 15 comments total

Part 1: Wood Lathe Router Guide

717 days ago by Jim Jakosh | 15 comments »

I’ll take you through the steps I used to build my router guide for my wood lathe. It is essentially a box with adjustable sides and top which has a slot to guide the router bushing. It is made from 5/8” plywood, clear Lexan, Steel and aluminum.I started with a 11.5×11.5 bottom and cut rabbets on both sides on the table saw and made a cut out for the tail stock. The sides were glued in place held square by a couple scrap blocks. They had T nuts installed for the adjustment ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase