LumberJocks

Grizzly G0555

  • Advertise with us
Blog series by Jim Jakosh updated 12-23-2016 02:23 PM 1 part 2360 reads 11 comments total

Part 1: Drive Wheel Bearing Replacement

12-23-2016 02:23 PM by Jim Jakosh | 11 comments »

My Grizzly 14” band saw has been making a clunking noise when running for a while now so while the shop is down I decided to take a look at it. With the blade removed, I could hear a “lump,lump, lump” noise when turning the bottom drive wheel and then I could feel vertical movement in it. That meant the bearing is shot! I removed both screws in the front and real of the main shaft. Then I made the mistake of removing the 3 screws to unfasten the pulley and put a puller...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com