LumberJocks

Sphere Cutting Jig for the lathe

  • Advertise with us
Blog series by Jim Jakosh updated 09-16-2015 09:47 PM 1 part 3618 reads 28 comments total

Part 1: Sphere Jig

09-16-2015 09:47 PM by Jim Jakosh | 28 comments »

I have a job in the future to make some perfect spheres and I could do it with a template and lathe tools but I have often thought I’d like to have a jig to swing the arc to cut spheres. so I decided to make one that will cut convex spheres and concave pockets. I had some sketched but then started looking at what was commercially available and found the Carter Perfect Sphere jig. I followed that design since they had put in all the engineering and all I had to do was determine the size...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com