LumberJocks

Skylark53's Favorites

  • Advertise with us
View BertFlores58's profile

TWO-COLOR CONCEPT #4: Wooden Hinges for Diamond Grill Box Part 2

11-13-2012 08:36 AM by BertFlores58 | 9 comments »

HINGES There are lot of hinges that we can use for boxes. Hardwares such as metals, brass, and others are hard to find in the local hardware here in my place. Pin hinges are easy to do but not very convenient to use when the wood are not so strong to hold the pin. Often times, drilled holes are not allign. Wooden Hinges. The first hinge that I made was fitted on this box. The second was a differently fitted in a cylinder. The third will be this …. From 1/4 thick of yaka...

Read this entry »


View patron's profile

wedding box build - tutorial

06-12-2012 07:48 PM by patron | 25 comments »

i recently built a box for rivergirlto be given as a wedding present http://lumberjocks.com/projects/67292 as i had recently done a tutorialabout some design and cutting techniques http://lumberjocks.com/patron/blog/29227 that was fresh in my head and i used it for this box to make things easierrather than cut each part separatei started with some 5/4 black walnut and maple stock and double taped them together on edge and them cross cut them into blocks(no real size just...

Read this entry »


View SPalm's profile

Double Tumble Cutting Board

05-31-2011 03:11 AM by SPalm | 38 comments »

Or maybe I should call it Two and a Half Steps. Anyway, I cannot believe that I am building another one of these, but heck, they are so much fun. This is a continuing saga of endgrain geometric boards using three contrasting woods. A light color, medium color, and dark wood selection are jointed and planed to the same thickness. I started by tilting the blade to 60 degrees and ripping an edge on all three boards. I then moved the blade over about an inch and ripped again creating a sma...

Read this entry »


View McLeanVA's profile

Cutting Board: How To's #2: Zig Zag Cutting Board Patterns - Inspirational

10-05-2010 09:19 PM by McLeanVA | 22 comments »

I was absolutely overwhelmed by the positive response to my Zig Zag How To blog post yesterday, that I decided to brainstorm some possible combinations (on my lunch break) using the basic steps I outlined yesterday. All of the same techniques and steps apply, and really the only difference is the woods and measurements that make up the original “sticks.” Same rules apply to width = height. Length is up to you. Please experiment with whatever measurements and combinations strike...

Read this entry »


View Scott Bryan's profile

CS1 End Grain Cutting Board

09-30-2010 02:49 AM by Scott Bryan | 14 comments »

Well I finally decided to join the cutting board club and this project completes my membership requirements. Now I am waiting for one of you charter members to send me the secret handshake. :) I needed to come up with something for my wife since her birthday is coming up this weekend. It basically boiled down to building her something or taking her shopping for clothes. To tell the honest truth I would much rather be spending time in the shop rather than sitting in a chair while she sp...

Read this entry »


View dustynewt's profile

A Keychain is Born ~ 8/30/10 ~ With Video

08-30-2010 10:29 AM by dustynewt | 9 comments »

I must apologize for my lack of interaction here on LumberJocks. I am on the night shift at the paper mill and my neighbors don’t dig the 2:30 am woodworking bit, so I have been limited to my keychain work and ya’ll have seen that. It is my night off and I remembered a couple requests a while back to do a blog on my keychain process. So, here ‘tis! I hope the video comes out right. I’ve been experimenting with my CoolPix. Short videos? I can do that! So I decided to...

Read this entry »


View Andy's profile

13,000 Views!

05-26-2010 06:33 PM by Andy | 35 comments »

The first Art Box I completed and later posted was “Rachels Box”. I wasnt sure how it would be received, but it was a big hit right off the line. It just recently topped over 10,000 views and is the most viewed box on LJ. Wow! http://lumberjocks.com/projects/tag/box/by/views Its popularity and the ones that followed were what motivated me to post the tutorial which was a help to many.http://lumberjocks.com/Argyllshire/blog/9415 I still get mail asking about this style of box...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase