Skip's Blog at LumberJocks.com http://lumberjocks.com/Skip/blog Sat, 28 Jun 2008 14:16:50 GMT Building a tail vise http://lumberjocks.com/Skip/blog/5082 I need some information on building a tail vise. I bought the components on Ebay but there are no instructions.

Never mind. Found it.

Thanks

]]> Sat, 28 Jun 2008 14:16:50 GMT http://lumberjocks.com/Skip/blog/5082 Skip Skip Jig for mating two curved surfaces for gluing (Part deaux) http://lumberjocks.com/Skip/blog/5010 I have re-created the episode on building a jig to mate two curved surfaces for gluing. I hope
this is much better.




]]> Sat, 21 Jun 2008 18:31:11 GMT http://lumberjocks.com/Skip/blog/5010 Skip Skip Insetting an inlay on a dining table http://lumberjocks.com/Skip/blog/4940 Please don’t be too critical on this one. This was my first video and also my first attempt to inset an inlay. I had a lot of hours in this table and was very nervous. You may ask, “Why the inlay”. I just wanted an accent.

- – Skip – -

]]> Fri, 13 Jun 2008 17:58:48 GMT http://lumberjocks.com/Skip/blog/4940 Skip Skip Jig for mating two curved surfaces http://lumberjocks.com/Skip/blog/4939 I built this jig, so I could mate two curved surfaces and have a clean glue joint. I used it on a dining table. I will post pictures of the table shortly.

—Skip—

]]> Fri, 13 Jun 2008 17:53:36 GMT http://lumberjocks.com/Skip/blog/4939 Skip Skip Sharpening a cabinet scraper http://lumberjocks.com/Skip/blog/4937 Someone asked me to post this video on this site, so here we go. It is my idea of how to sharpen a cabinet scraper. If I am all wet, please let me know.

]]> Fri, 13 Jun 2008 17:23:45 GMT http://lumberjocks.com/Skip/blog/4937 Skip Skip Hello http://lumberjocks.com/Skip/blog/4929 I joined long ago and just did not get to post anything. My website http://www.my-wooden-creations.com has not gotten many hits. I also discovered that I do not like making videos. It is really hard for me to talk to a camera. So, I think I will move to Lumberjocks and post photos and blogs on projects instead. Here’s to the future.

]]> Thu, 12 Jun 2008 18:38:57 GMT http://lumberjocks.com/Skip/blog/4929 Skip Skip