| This blog is written by Siegel_KenEvil | 16 entries so far |
-
Concrete Countertop Series #10: Final Entry
This will be my final blog entry. I’ll post a finished project after applying calk and get...
-
Concrete Countertop Series #9: Filling Small Pits and Repair Job
Late for a party so I have to be quick This was my set-up last night to fill the voids. I...
-
Concrete Countertop Series #8: Molds Removed - Top Surface is Exposed
It’s been 6 days since the first pour and 5 days since the back-splash and void fills. I w...
-
Concrete Countertop Series #7: Be Carefull, Cement Burns!
I ended up in the hospital last night after 4 days of agony. http://en.wikipedia.org/wiki/Port...
-
Concrete Countertop Series #6: Concrete Curing
It’s been two days since the first pour. When I pulled off the top form, I discovered that...
-
Concrete Countertop Series #5: The Big Pour
The concrete is poured and it was nothing like I was expecting. I had my daughters fill the back...
-
Concrete Countertop Series #4: Computer Analysis on Concrete Countertop
Still killing time waiting for the concrete. One week to go. I work for an engineering and de...
-
Concrete Countertop Series #3: Waiting for the concrete
My order for two 80 pound bags of Quikcrete Countertop Mix is expected to arrive at the end of th...
-
Concrete Countertop Series #2: No progress, just gathering information
Yesterday I ordered the concrete mix from Lowes. Tried to find plasticizer there but they didn&#...
-
Concrete Countertop Series #1: 1st Entry
After two years of pondering, I finally started a concrete counter-top. This will be going in a ...
-
My first shavings
This was a long process. I took my #3 hand-me-down plane to a free hand plane tune-up class at W...
-
Table Saw Cabinet Project #4: Lifting Mechanism Concept Complete
I’m pretty happy with this. A few details are missing. As shown, the handle that lowers t...
-
Table Saw Cabinet Project #3: Basic Package Layout with Outfeed Table/Vise Idea
Here’s my update. The base is a torsion box that doubles as a muffler for the compressor a...
-
Table Saw Cabinet Project #2: Another part modeled up
This is one of the final parts I needed modeled up before getting serious about starting my table...
-
Offset Router Concept - I wish someone would make this
Here’s an idea I had and hopefully one of the major companies will pick up on it and make i...
-
Table Saw Cabinet Project #1: Pipe Clamp Math Data
I’m starting to design my table saw cabinet and needed to modeled up my pipe clamps. If an...
