| This blog is written by ShannonRogers | 18 entries so far |
-
Queen Anne Side Table #5: Drawer Dovetailing and Cockbeading
I’m a little late getting this up for my LJ brethren since it has been up on my site for a ...
-
Queen Anne Side Table #4: The Period Details
I’m finally back to producing these videos. I have been sitting on these clips for about a...
-
The Steppingstone Museum Apprenticeship #2: Introduction to the Steppingstone Museum Woodshop
Galoot nirvana is achieved. The video clip is a bit rough, but it was taken with my iPhone in a ...
-
The Steppingstone Museum Apprenticeship #1: I start working this weekend!
I am honored and blessed to be starting a traditional hand tool woodworking apprenticeship at the...
-
A Trip to Hearne Hardwoods
I put up another podcast and this time I took a trip to Hearne Hardwoods as a field trip during m...
-
Hand Tool Tips #2: Squaring End Grain by Hand
Nothing tells you quicker how sharp your plane blade than taking a swipe across the end grain. I...
-
Hand Tool Tips #1: Beveling An Edge
I hate cutting bevels on my table saw. No matter what I do I get significant burning that has to...
-
Queen Anne Side Table #3: Turning the Eccentric Cabriole Legs
This was a new technique for me and a learned a lot giving it a try. I think my neighbor’s...
-
Queen Anne Side Table #2: Part 2, The Joinery
No electrons were harmed during the building of this table. This was great fun and even more aff...
-
Queen Anne Side Table #1: Part 1, The Design
This build is part of my participation in The Wood Whisperer Guild build project. We are buildin...
-
A trip to Lie Nielsen...
The following is excerpted from my blog, The Renaissance Woodworker. I hope you enjoy it. We ...
-
Shop evolution #5: Router Table #4: The Final Chapter...
This is excerpted from my blog: The Renaissance Woodworker. So after getting the table top ins...
-
My apprentice moves on...
I have already put up this post on my personal blog and I don’t think I can make it through...
-
Shop evolution #4: Router Table #3: Putting in the plate and installing the fence...
So I got the Mast-R-Lift in place and did some tweaking of the leveler screws to get it flush wit...
-
Shop evolution #3: Router Table #2: I hate routing MDF!!!
Let me just start by saying…I hate to rout MDF!!!! Thank goodness for the respirator, air ...
-
Shop evolution #2: Table Saw Extension Router Table #1
After completing the new counter top, my next step will be to breakdown the adjacent cabinet that...
-
Shop evolution #1: Making room for the bench...
So as my work (and obsession) has turned more towards hand tools, and my recent reading of Chris ...
-
Aviary #1: Just getting started...
My sister-in-law loves birds and has several lovebirds. After visiting a relative in a nursing h...
