LumberJocks

Shop Improvements

  • Advertise with us
Blog series by Sarit updated 10-25-2017 06:38 PM 2 parts 20529 reads 17 comments total

Part 1: My love hate relationship with pegboard

02-02-2011 10:17 AM by Sarit | 10 comments »

I’ve recently moved into my new shop (aka 2 car garage), and I’m still pondering how best to use my wall space.In my old garage I had a whole 4’x8’ panel wall behind my workbench, but found it difficult to get all my tools there without making lots of custom holders and there was no storage for items too bulky for pegboard. Oh how I longed for some upper cabinets, but lamented on how that would leave me with a pitiful 20” strip of pegboard under its dark shadow. ...

Read this entry »


Part 2: Why your SawStop riving knife still isnt aligned

10-25-2017 06:38 PM by Sarit | 7 comments »

My SawStop PCS tablesaw has a pretty fussy riving knife adjustment system. You have to crank the blade up to check alignment and then crank it back down to be able to adjust the bolts and of course every time you tighten the bolts you move the knife out of alignment. So back and forth you go crank, loosen, align, crank, tighten, crank, loosen, align,... Then once you’ve got it just right, and you crank the blade back down to a reasonable height to cut some 3/4” plywood the knife seems out of ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com