LumberJocks

The One Minute Workbench 3.0 #1: The design

  • Advertise with us
Blog entry by Sanderguy777 posted 05-16-2018 06:46 AM 443 reads 0 times favorited 1 comment Add to Favorites Watch
no previous part Part 1 of The One Minute Workbench 3.0 series no next part

To paint or not to paint?

So I am wanting to build a version of the one minute work bench 2.0. If you look that up on, YouTube you can see a video of what I’m talking about but basically, it holds a table saw, air compressor and a mitre saw in the table saw out feed table.

My version will be only be about 4 feet long and 3 feet wide to fit my available space. I want the table saw to be the main thing but I also need space for my miter saw and since I have a tiny air compressor, why not?

Thanks guys. Its good to be back

-- Marc Spagnuolo (standing in front of clamp wall): I think I need a few more . Me (owner of at least 8 clamps):.....?



1 comment so far

View Sanderguy777's profile

Sanderguy777

179 posts in 1322 days


#1 posted 05-17-2018 01:00 AM

Here are some photos of the design in Sketchup. while I did design the size and some mods, I saw the original idea here https://www.youtube.com/watch?v=SKOCpNIV2Is&t=15s

I plan on making the whole thing from cheap 1/2” plywood and just doubling up on the top and maybe where the table saw goes.

The base will have either 4 or 5” fully lockable casters. I also plan on adding a folding table to the left side in order to put either the miter saw on or just as a longer outfeed table.

Any comments are welcome and I will try to keep you up to date

-- Marc Spagnuolo (standing in front of clamp wall): I think I need a few more . Me (owner of at least 8 clamps):.....?

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com