| Blog series by SPalm | updated 665 days ago | 2 parts | 1186 reads | 24 comments total |
Part 1: Prototype
Well, I started cutting up my 2×4 and did some prototyping. Jointed and resawed a bit. Then I sent them through my little Ryobi thickness planer. Even after letting it acclimate to the house for a week, once it was prepared, it still warped more than I would have thought. I had never resawed anything before as all I have is a craftsman bandsaw. But with a new large blade, it worked much nicer than I would have thought. You can see the bandsaw in the background. I had never rea...
Part 2: It takes shape
Getting much closer. The finally assembly takes shape. It is a Krenov type cabinet. Maybe a disservice to the Master trying to build one out of a 2×4, but I wanted the largest piece of furniture that I could build, and this is what appeared. It has been fun. I am trying to figure out how to complete it. The door is not attached. It is about an eighth of an inch thick. The plan was to glue a block to the inside top and bottom of the door and use finishing nails as hinge pins. T...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
