LumberJocks

SPalm's Blog

  • Advertise with us
This blog is written by SPalm | 38 entries so far

Latest Entry

Shop Stool #2: Becomes a Table

07-04-2014 12:15 AM by SPalm | 4 comments »

Well, the plan was to add turned stretchers. I had visions of a slight taper from the center with through tenons that were splined in the ends. Did not work out. I had so much trouble with chatter on the old cherry that I was not able to turn reliably at all. I could get it close and then sand to smooth, but it just did not go right. I am sure it was caused by my lack of turning skills. .So it went with rectangular stretchers. The plan was to make small offset mortises and use offset tenons so I could use a large round over without the router bit running into them. So I cut the mortises with my small router. I am getting to love that little thing, it is so much easier to control that m...

Read this entry »

Older Entries

View all 38 entries »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase