Incra Router Table

  • Advertise with us
Blog series by SPHinTampa updated 09-26-2013 03:02 PM 3 parts 7630 reads 7 comments total

Part 1: Creating base cabinet

06-22-2013 12:21 AM by SPHinTampa | 1 comment »

My original router table was one of my first major projects. I was very pleased with the result and it worked well for years. I recently decided to rebuild my router table, primarily because I screwed up my first router table by installing a cheap phenolic plate that sagged. I had just been using a router screwed directly to the base of the table top and then using a piece of masonite with various sized holes to as a zero clearance insert. Then I bought a panel raising bit and figured i...

Read this entry »

Part 2: Drawers and top

09-24-2013 03:51 PM by SPHinTampa | 2 comments »

Long delay in posting. Have been very busy at work and havent had time to post. In this session, I installed the face frame and doors on the router base as well as mounted the table top. I started with the finished outer case And ended with the drawers installed Steps in this session 1. Installed hardwood drawer runners2. Mounted face frame and caster wheels3. Drill, tap and mount top4. Build and install drawers Step 1 – Install hard wood runners Rip hard wood...

Read this entry »

Part 3: Finishing it up

09-26-2013 03:02 PM by SPHinTampa | 4 comments »

I finished up the project in this session. Since it sticks out, I will comment on my non standard design – i.e. drawers in the back. I originally did this as an attempt to fix an issue in my shop lay out – stupid move. Fortunately, the flaw is not as annoying as I was worried since the INCRA Router Top has you standing at the side (facing the fence) vs standing at the long edge. So I started here And ended here Steps I followed in today’s session1. Dust Collec...

Read this entry »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics