LumberJocks

Routerisstillmyname's Favorites

  • Advertise with us
View Tim Dahn's profile

Making an Adjustable Try Square

10-24-2013 01:18 PM by Tim Dahn | 22 comments »

Making an Adjustable Try Square is a pretty staight forward build, here are the parts: I chose rosewood for the handle, approx. 4” X 1/12” 1/2” Some brass, 5/16” rod,1/4” rod and 1” flat stock (about 1/16”)Brass inserts and screws 8-23 X 1 1/2” long. The handle must be flat and square if you want a square that is square on both the inside and outside reference. Check the width with calipers and get it exactly the same on each end, then...

Read this entry »


View David's profile

Furniture Design #1: Fibonacci gauge

08-05-2007 02:00 AM by David | 32 comments »

1 • 1 • 2 • 3 • 5 • 8 • 13 • 21 • 34 – The Fibonacci Sequence I have been fascinated with The Fibonacci Sequence and The Golden Rectangle for some time. I finally got around to building a Fibonacci Gauge that was featured in WOOD Magazine. The guage maintains a consatnt proportion of 1:1.618 between the points. It is used to help determine visually appealing proportional dimensions. I am looking forward to using the guage in future projects. Follow the text below for so...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase