Top Trim The top assembly “sandwich” is trimmed by 1/8” thick poplar slats that rest on the outer edges of the leg tenons. This trim and the legs form what is a metal frame on the original table. I cut the trim from the sam...
|View Ron Stewart's:||home||workshop||projects (10)||blog (13)||reviews (0)||forum topics (0)||buddies (0)||favorites (4)||activity log|
None so far
53 posts in 2046 days
Latest Activity | view all »
Latest Projects | view all 10 »
Latest Blog Entries | view all 13 »
The table’s legs are tall and thin, with a diamond shaped cross section. The outward-facing edges are beveled to 120 degrees to match the angles of the top hexagon’s vertex angles. After puzzling over how to cut those angles, I foun...
The top assembly is a three-layer sandwich approximately 1 1/8” thick. The bottom layer is 1/2” thick MDF hexagon. I had never cut a hexagon before, so I searched the web and found the excellent article Cutting Hexagons on a Tab...
This series of blog posts outlines some of the construction details of my Hexagonal Cocktail Table project. As I mentioned in the project description, this table is a reproduction of a commercially available table. The original has a metal fram...
This is the second and final post describing my Turntable Plinth project. To sculpt the sides, I used a table saw and three router bits: a 1/2” cove bit, a 3/4” roundover bit, and a 1/4” round nose bit. 1. Start with 2-3/4&...