| This blog is written by RonInOhio | 19 entries so far |
-
A Small Woodworking Shop Expansion #18: Roofing and Siding Going Up On the Lean-To.
Despite all the rain I managed to make some progress on the lean-to. A neighbor was kind enough t...
-
A Small Woodworking Shop Expansion #17: Ready to Sheath the Lean-to. A Few Scores. And a Surprise Inspection !!
I was going to wait till I had the lean-to sheathed before making another post, but decided to go...
-
A Small Woodworking Shop Expansion #16: Progress Update For May 2013
In my last entry, I talked about the issues that this expansion has caused with all the construct...
-
A Small Woodworking Shop Expansion #15: Light At The End of the Tunnel ?
Or is that a train ? Currently am in the process of taking down the old siding and applying a ...
-
A Small Woodworking Shop Expansion #14: Every Day Brings Me Closer To The Goal.
Got to keep saying that to myself because it would be easy to become frustrated. I realize constr...
-
A Small Woodworking Shop Expansion #13: Finally Weather Is Breaking
Been awhile since I last posted to this shop expansion blog, but there has been little to noprogr...
-
A Small Woodworking Shop Expansion #12: Soffit and Siding Underlayment
Weather was good today. Took advantage of that to start the soffits. Also put up some xps GreenGu...
-
A Small Woodworking Shop Expansion #11: Getting Back To It.
Well its been almost two weeks since I have made any updates on my shop expansion so here is a a ...
-
A Small Woodworking Shop Expansion #10: Roofing Paper and Drip Edges Done
Christmas Eve made a run to HD and picked up a bundle of shingles,drip-edging, and some roofing n...
-
A Small Woodworking Shop Expansion #9: Progress Update December 22
The cold weather has arrived and the winds were kind of strong all day yesterday and last night. ...
-
A Small Woodworking Shop Expansion #8: A Few Setbacks and a Race Against Cold and Snow
My progress has been delayed due to a few setbacks. I had all the rafters cut. All the rafter har...
-
A Small Woodworking Shop Expansion #7: Getting The Walls and Sheathing Up.
Just an update on what was accomplished over the last week. Got the walls framed and standing. Cu...
-
A Small Woodworking Shop Expansion #6: Laying Out the Wall Frames
Had to take a step back from my shed expansion project to go over how I’m going to layout t...
-
A Small Woodworking Shop Expansion #5: Floor Insulation Installed ,Almost Ready to Start Framing
Been a little frustrating at the time and money its taken me to get to the point where I’m ...
-
A Small Woodworking Shop Expansion #4: Putting XPS Ridgid Insulation Between Floor Joists
Went out today to pick up more 1×2x8 PT lumber to finish putting billets in-between the jois...
-
A Small Woodworking Shop Expansion #3: Update November 28
Well I worked about 12 hours Saturday and got some of the hangers and floor joists in. I took a b...
-
A Small Woodworking Shop Expansion #2: Started Expansion of the Shed
Finally started the expansion. Its a modest expansion but will end up giving me around 160 sq. fe...
-
A Small Woodworking Shop Expansion #1: Introduction 1
Update: Started expansion finally on what is essentially now, just a 10X8 tool shed. If all goes ...
-
My Introduction To Woodworking #1: The Early Years
Not sure if it was the first wood-project I made but its the earliest that I can remember. I don&...
