LumberJocks

One man's journey into traditional hand-tool craftsmanship

  • Advertise with us
This blog is written by RobNPHX | 4 entries so far

Latest Entry

Workbench build #2: Completion of the bench top

03-26-2017 07:26 PM by RobNPHX | 3 comments »

After about a week of work, I have combined all three laminated groupings to produce the final top. All of the leveling was done by hand with a low angle jack plane. Any twist has been removed, and the top is mostly straight and level – there are a very few, hard to see undulations in certain areas. This is only the second project I’ve done with this amount of planing. The first time was my small coffee table. I ran a 120 grit sand paper over it at the end. I used Titebond III for the glue ups. One of the key challenges with building the top out of the 2×4 material is finding wood that is straight to start with. Additionally, while the LA Jack does good work, th...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com