Another of Diana Thompson’s 3d ornaments that I cut out.

This ornament was designed by Diana Thompson and I used Steve Good’s jig to cut it. The halo is painted gold and the wings are glittered on the front. The back of the wings is left plain so a pet’s name can be added. This piece is cut from a recycled walnut block that I got from a local cabinet maker.

The trivet was cut out of a 3/4” piece of hard wood then dipped in lemon oil and finished with a clear top coat. It was designed by JOSCROLLS.

This pattern was designed by Wade Smith. I cut it out of 1/8” Baltic Birch on my DW 788(type 1).

These 3 sleds were painted by Kathie(The Toler) on a generic sled pattern that I cut and put together some time ago. Karen Wisner designed the painting pattern.

This is another one of Sheila’s word art patterns that I cut and Kathie painted and glittered. Instead of using the eye screws, I just wrapped the chain around each ghost’s head.

Another of Sheila’s pattern designs. I cut it on my DeWalt and once again it was decorated by Kathie.

The pattern for these snowmen was designed by Sheila Landry and cut by me then decorated by Kathie(The Toler).

Another of Shelia’s designs. I used 1/4” maple for the sled body and 1/8” ash for the runners. I added a clear top coat and gold thread.

This is one of Sheila Landry designs. I used 1/2” ash for the cut out with a 1/8” backer board that was painted for the background. It is finished with clear top coat and a frame back is added.