Reinan's Blog

  • Advertise with us
This blog is written by Reinan | 17 entries so far

Latest Entry

African Mahogany & Curly Maple Coffee Table #7: Assembling base

01-14-2018 04:32 PM by Reinan | 0 comments »

Due to the 8/4 material I used for the legs, the 4/4 aprons needed to be rebated to maintain their proportion to the legs and the integrity of the leg mortises. Machining the rebates in the long aprons was part of the reason I built the miter gauge extension, the other being the notches for the cross lap between the aprons. I completed the machining after work yesterday and fit the parts together; the fitting was minor a few swipes of a chisel and light sanding and I had a good tight fit. Next I assembled the aprons and and then added glue and tapped the legs on. Clamped it up and let it sit over night, pulling the clamps this morning. Next step will be some edge profiling on the legs ...

Read this entry »

Older Entries

View all 17 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics