LumberJocks

Redoak49's Blog

  • Advertise with us
This blog is written by Redoak49 | 8 entries so far

Latest Entry

Down Draft Sanding Box

10-31-2016 01:30 AM by Redoak49 | 3 comments »

I was working on some boxes and doing a lot of sanding and even with an air filter on, there was a lot of dust in the air. I had a small down draft sanding box but it was not big enough and decided I needed a bigger one. I made the box about 24” square and 6” tall. The sides are 1/2” plywood and the top is 1/4” pegboard which originally had 3/16” holes. I got it together and attached a 4” dust collector port on one side. I tried it out with my dust collector and found that it was not pulling much air and I needed to increase the hole sizes. Around the outside, I drilled the holes to 1/2” diameter and also increased the holes size...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com