LumberJocks

Unisaw Restoration #1: Weight Breakdown of a Delta Unisaw

  • Advertise with us
Blog entry by Rapola posted 05-10-2016 02:28 AM 1058 reads 0 times favorited 1 comment Add to Favorites Watch
no previous part Part 1 of Unisaw Restoration series Part 2: Call the midwife »

Wanted to give a detailed breakdown of the weight of a 1960’s era Delta Unisaw

Total weight ~320 pounds (145kg)

  • Top – 60 lbs (27kg)
  • Extension Wings 2 @ 22lbs ea = 44 lbs (20kg)
  • Cabinet with basic components (motor mount, etc) 120 pounds (54kg)
  • Motor 60 pounds (27kg)
  • Cast Iron Base 30 lbs (14kg)

These will easily fit in the back of a small suv. 4 bolts should allow you to remove the top with the extension wings; saving ~100 lbs (45kg); optional if you want to remove the motor.

Below is my project/potentially part out unisaw. Paid $100 for it which included an old morgan vice. The vice broken and was re-welded, so time will tell if that was done correctly.

Not sure what the plan is at the moment; The saw came with the normal cast iron top and what looks like a top from their shaper; I figure at $0.33 per pound and a bench vice to sweeten the deal it was worth getting.



1 comment so far

View kaerlighedsbamsen's profile

kaerlighedsbamsen

1177 posts in 1179 days


#1 posted 05-10-2016 12:41 PM

Looking forward to follow where this is going!

-- "Do or Do not. There is no try." - Yoda

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com