LumberJocks

Radu's Favorites

  • Advertise with us
All Topics Replies Last post
View boxedin's profile

V-Drum Sander Project

252 days ago by boxedin in Jigs & Fixtures

Here’s a link to my V-drum sander project: http://www.pbase.com/cjma...

12 95 days ago
View UpstateNYdude's profile

Rust remover for my new planes

371 days ago by UpstateNYdude in Hand Tools

Alright so I just got a sweet deal on some new (Old) Stanley hand planes toda...

49 361 days ago
View dhazelton's profile

Anyone use untinted base paint as a substitute for spar varnish?

897 days ago by dhazelton in Finishing

Like the question says – I have to sand and clear coat a wood door that...

28 445 days ago
View gsimon's profile

Where do you buy Pre-fab hardware to make jigs?

452 days ago by gsimon in Jigs & Fixtures

Hi FolksWhere do you purchase the aluminum C-Channel, T-Bolts, Hold Down Clam...

19 450 days ago
View Dave's profile

What are your shop recipes?

494 days ago by Dave in Focus on the Workspace

What formulas do you use in your shop?Here are some I use. Poly Rub1 part ...

78 291 days ago
View Dallas's profile

Wynn Filters

593 days ago by Dallas in Power Tools, Hardware and Accessories

OK, as an ex trucking company owner I have to ask, How long does the Wynn dus...

22 591 days ago
View Daren Nelson's profile

2 tone wood dye

2342 days ago by Daren Nelson in Woodworking Skill Share

I do alot of this and get asked how it is done some times, so I thought I wou...

24 909 days ago
View DIYaholic's profile

2 HP HF DC Mod Question????

979 days ago by DIYaholic in Power Tools, Hardware and Accessories

It is time for me to “Hot Rod” my 2 HP HF DC!!! I plan on upgradi...

36 967 days ago
View b2rtch's profile

HF dust collector total make over

996 days ago by b2rtch in Power Tools, Hardware and Accessories

I wanted to do this for a long time and finally this morning I did it.In abou...

65 400 days ago
View slickSqueegie's profile

Shop Made Bench Vice

1058 days ago by slickSqueegie in Jigs & Fixtures

Hello all Im new here and wanted to say hello first.. I have been needing ...

6 474 days ago
View Jerry's profile

Patching Brad Holes

1361 days ago by Jerry in Woodworking Skill Share

I took a woodworking finishing class out at my local JC and the instructo...

11 406 days ago
View handystanley's profile

Polyurethane..why cannot we just get along

1091 days ago by handystanley in Finishing

It seems whenever I decide to use a polyurethane product…we just do NOT...

38 696 days ago
View Ed's profile

Issues with Water Based Aniline Dye

1187 days ago by Ed in Woodworking Skill Share

Hi Folks, I am new to this forum and even more new to wood finishing. I&#...

76 1115 days ago
View bubinga's profile

Free plans, "SWEET"tablesaw crosscut sled from The Wood Smith Shop

1203 days ago by bubinga in Woodworking Skill Share

There is also a nice Adjustable Tenon JigThese are set of really nice plans, ...

6 1182 days ago
View Alan S's profile

Debate Homemade V- vs. Thickness-Sander NO MORE!

1645 days ago by Alan S in Designing Woodworking Projects

A thought occurred to me recently when trying to compare the V-drum type sand...

20 1249 days ago
View Chiefwoodworker's profile

Beginner's SketchUp Tutorial - Part 6

1348 days ago by Chiefwoodworker in Woodworking Skill Share

I just released part 6 of this series. So if you have been following along yo...

4 1348 days ago
View ChunkyC's profile

Tablesaw and Dust Collection question

1795 days ago by ChunkyC in Power Tools, Hardware and Accessories

I have a Delta 10” Contractor’s Saw. The rear of the saw where t...

33 1372 days ago
View Tim Dahn's profile

Picture frame Glue up tip

1402 days ago by Tim Dahn in Woodworking Skill Share

While reading yuri's post regarding clamping time the “memory vault doo...

20 1382 days ago
View Steve Maskery's profile

How to make a Luthier clamp

1502 days ago by Steve Maskery in Woodworking Skill Share

Hi allYou’ll know when you’ve got to heaven because in heaven you...

15 905 days ago
View juicegoose's profile

My process of fitting my router table plate

1386 days ago by juicegoose in Focus on the Workspace

Well I was able to finally get some shop time and get the router plate fitted...

1 1386 days ago

1 2 next »
24 topics


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase