This is a model for the Woodpecker’s router table plate sized 9-1/4” x 11-3/4”. it is the same size for all their lift/non lift plates, also same size for the pinnacle plates, Jessem plates, and incra plates that are 9-1/4”x11-3/4” in size. the material width is 3/8” but can be modified to fit other materials.
(although it is advertised as 9-1/4”x11-3/4” is it slightly different – I think the margin of error is in the 1/1000 range. but the model is according to the exact specs)
Special Thanks to Tom Adamski for helping with the texture and measurements. Thanks Tom!!!
enjoy.
-- When in doubt - There is no doubt - Go the safer route.
5 comments so far
PG_Zac
home | projects | blog
150 posts in 282 days
posted 264 days ago
Thanks for the models Lev.
-- I may be schizophrenic, but at least I have each other.
Stoli
home | projects | blog
2 posts in 260 days
posted 260 days ago
Any plans to create a model of the Leigh D4R?
PurpLev
home | projects | blog
2734 posts in 542 days
posted 259 days ago
If someone can ship one to me – I’ll model it. ;o) I’ll try and see if I can find dimensions online, or through Leigh to model it up since I do not have one available to me physically, and I’ll post it up it if I can get it.
-- When in doubt - There is no doubt - Go the safer route.
Stoli
home | projects | blog
2 posts in 260 days
posted 255 days ago
I could take pictures from various angles and include a ruler in each pic…
PurpLev
home | projects | blog
2734 posts in 542 days
posted 254 days ago
Stoli- it’s worth a shot, not sure how accurate I can tune myself to such pictures – but it’s better than nothing. PM me if you get a chance to get those pics done.
-- When in doubt - There is no doubt - Go the safer route.