It has been a couple weeks but tonight was able to get back to the project. The top rail is going to be a flowing curve, so needed to create a jig for the glue-up. Step (1): glued two 3/4 inch plywood pieces Step (2): cut into oval to match top railStep (3): cut 2×4 into pieces to create curve to which the top rail will be glued I still need to cut the angle on each of the pieces and affix them to the base. Next step: turning the spindles!
|This blog is written by Bob Giovannini | 4 entries so far|
This next step involved shaping the bottom of the base. After scribing a line 2 1/8 inches in, I ...
I am pretty psyched how this is coming along. This week I started shaping the base. I used a ban...
My first project is a baby cradle. We are expecting our first in April, so should be plenty of ti...