Cabinet of curiosities #3: Carcase Assembly

  • Advertise with us
Blog entry by Porcupine posted 09-15-2013 01:07 AM 789 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 2: sketches Part 3 of Cabinet of curiosities series Part 4: Face frame »

We began building the cabinet by constructing a carcase from half inch birch plywood. Daddy ripped the plywood to width on the table saw, then to length with his festool track saw. We had to double the plywood to meet the one inch thickness required. We glued it and held it in place with clamps,

before securing it with a nail gun.

We thought it would be better to paint the interior before putting the cherry frame on, so the paint would not get on the cherry frame.

Here is a picture of the finished carcase with the interior cherry frame.

-- Joe, South Carolina

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics