LumberJocks

Philzoel's Favorites

  • Advertise with us
View JoeyG's profile

Layered epoxy inlay #7: Correcting My Mistake

01-12-2012 01:13 AM by JoeyG | 7 comments »

When I left you last time I had created a big problem by putting to much paint in my epoxy mix. Now I get to scrape it all out. Since it is still gummy I figured it would just clog up the bit on my dremel so I did it the old fashion way. I a have also included a couple of samples I am working on so I hopefully avoid further problems. This first picture shows the tools I have assembled for the job. Just a knife and a couple of chisels. Here is the chisel that did most of the work. I...

Read this entry »


View degoose's profile

How to make a endgrain tumbling block butcher block board!

08-12-2009 12:13 PM by degoose | 50 comments »

Hi guys ,, I had a request to make a tutorial with regards the endgrain Tumbling Block Design.First off,.., You need to decide the size of the blocks…. for this example I used 1” stock… Or something similar.. actually just over .. once dressed. Set the blade of the table saw to 60 degrees.. a bevel box makes this simpleI use the INCRA fence system so it is easy to rip bevels off side of the blade.Once the bevels are ripped measure the length of the bevel and move the f...

Read this entry »


« prev 1 2
12 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase