This is with all the stuff inside DoubleDD had a good idea to use scraps for the door panels. i will use that idea. sort of a patchwork .
|View Parsimonia's:||home||workshop||projects (8)||blog (5)||reviews (0)||forum topics (0)||buddies (0)||favorites (3)||activity log|
None so far
51 posts in 1456 days
Location: Pasadena MD
Latest Activity | view all »
|replied on||No Images?||11-19-2013 05:12 AM|
|commented on||Every guy/gal needs a sign for their shop!||11-19-2013 04:55 AM|
|added project||Spalted Poplar Bowl||11-19-2013 04:36 AM|
|replied on||No Images?||11-19-2013 03:12 AM|
|commented on||Every guy/gal needs a sign for their shop!||11-19-2013 01:06 AM|
|commented on||Every guy/gal needs a sign for their shop!||11-18-2013 04:29 AM|
|commented on||Every guy/gal needs a sign for their shop!||11-16-2013 11:25 PM|
|commented on||Shaker Boxes||10-10-2013 03:40 AM|
|commented on||Garage Tool Cabinets #5: Tools and stuff in cabinet||10-02-2013 03:40 AM|
|replied on||How to drill holes in rubber balls?||10-01-2013 05:47 PM|
|added blog entry||Garage Tool Cabinets #5: Tools and stuff in cabinet||10-01-2013 02:45 PM|
|commented on||onesojourner's Workshop||10-01-2013 12:49 PM|
|commented on||Scraps to Cabinet Doors||10-01-2013 12:28 PM|
|commented on||Cognac Glass||10-01-2013 03:09 AM|
|added project||Cognac Glass||10-01-2013 01:40 AM|
Latest Projects | view all 8 »
Latest Blog Entries | view all 5 »
I mounted the cabinets by making a ledger board with a 2×6, and a couple of 2×6s on each end. I blocked one end up until it was level, and then set the cabinets on top. I clamped, drilled and screwed both cabinets together. The 2×...
Rather than glue up everything at once, which had resulted in glue setting on the first piece before it’s properly aligned and clamped, I’m gluing in stages. After gluing the blocks under the bottom shelf, I shot some 1” brads t...
One carcass is glued up. One block under the lower shelf moved under the clamp slightly. I should have shot a few nails to hold it in place like Sommerfeld recommends, (and had done before), so one back corner of the bottom shelf is just slig...
So after making a large workshop upper cabinet, and then a glass door cabinet, I decided to start making more cabinets to store garden tools in the garage. While I’m at it, I decided to make two, one for long handled tools, and another with...