Morris style glider #8: Gluing of laminated armrest

  • Advertise with us
Blog entry by Orange008 posted 01-18-2015 09:29 PM 1197 reads 1 time favorited 2 comments Add to Favorites Watch
« Part 7: Dry assembly of lower body Part 8 of Morris style glider series Part 9: Layout of side assembly »

Three thin pieces make up the lamination of one arm and are glued on a form. The form is made of scrap plywood and cut according to the dimensions in the plans. Each piece is slathered in glue and then bent around the form and clamped into place. After drying, the clamps are removed. One edge is trued up and flattened with a jack plane and then the curve laid out on the opposite side and cut on the bandsaw. More sanding and shaping need to be done as well as the mortises for the tenons on the top of the legs to protrude.

2 comments so far

View NormG's profile


5434 posts in 2427 days

#1 posted 01-18-2015 10:15 PM

Love the grain pattern, great progress

-- Norman

View Luddite's profile


170 posts in 661 days

#2 posted 01-19-2015 01:03 AM

Impressive work Orange008! I admire your work ethic.
I’ll be interested in your final results.

Cheers Terry

-- T Loftus -- Just on the edge of common sense

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics