Morris style glider #4: Breakdown of wood

  • Advertise with us
Blog entry by Orange008 posted 01-15-2015 08:12 PM 1193 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 3: Cutlist 2.0 Part 4 of Morris style glider series Part 5: Cutting to rough size »

I haven’t posted in awhile. I have finally found some time to show my progress.

I purchased the lumber at the end of September and began to mark out on the wood where my cuts would be. I used a light blue chalk to show up well on the dark wood. I also marked a letter on each piece to correspond to my cutlist and assembly instructions with a grease pencil, so it would not smudge or rub off easily during the breakdown of the wood, but not stain as a marker would.

Some of the boards were resawn to make 3/8” or thinner pieces.

0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics