Voy a construir una cabina de pintura casera, pensé en hacerla inicialmente con un ventilador de 20” y un filtro, pero un amigo me regalo una turbina, por lo que me parece que quedara mucho mejor el proyecto, ire colocando los avances.

Un pequeño proyecto para un amigo. la base para un volante de xbox 360. Casi Terminado. Es ajustable para distintas alturas.

Este es el ensamble hecho a mano.

Estos otros con Router

Me di a la tarea de Hacer el modelo en Sketchup para hacer mas grafico el proceso, para despues ilustrarlo con fotografias reales

I gave myself the task of making the model in SketchUp to make more graphic the process, illustrated with photographs after real

Mis pasos.
My Steps

1. Primero hay que escuadrar la madera perfectamente para que las dos maderas sean del mismo espesor.
First the wood must be perfectly square to the two boards are the same thickness.

2. Hacer dos marcas en los frentes de las dos maderas con separaciones de 6mm 1/4”
Make two marks on the fronts of the two woods with separations of 1 / 4 “

3. A partir de la Segunda marca marcaremos 83.1° de inclinación para definir el medio pin. La relación es 8:1
A second indication from the 83.1 ° tilt will mark to define the middle pin. The ratio is 8:1

4. En mi caso use 6mm para el angulo de contacto, de igualmanera marqué los laterales el angulo de 45° y las lineas para definir cual es la porcion a ser retirada.
In my case I use 6mm for the contact angle, just as I marked the side angle of 45 ° and the lines to define which is the portion to be removed.

5. Con una broca recta retiro la porcion frontal sin exceder la linea de 45° y el limite de los 6 mm. With the router and straight bit front portion removal without exceeding the 45 ° line and the limit of the 6mm.

6. Con el router y una broca en V podremos crear la muy dificil solapa a 45°.
With the router bit in V and we can create the very difficult flap to 45 degrees.

7. Con el router y una broca de cola de milano o una broca recta se retira los excedentes donde encajara la cola de milano.
With the router and a dovetail bit and a drill bit is removed surplus line where the dovetail fit.

8. Con esto obtendremos los medios pines
This means we get the half pins

Seguimos actualizando el Post
Continue to update the post

I start with google sketchup

Then render with shaderlight

The color will be black or chocolate
This render is more quality

I dont have plans yet but i can share the model if you wish.

I love this painting rack

i use a marble for rotating doors

• The bubble level only indicates whether or not being level.
• Lead, indicating the correct verticality between two points
• The rule tells us how the flat wall is placed where the leg of the frame.
• The thread shows capping of the edges.
• The squad shows that there is a right angle at the corners.
• The level of hose gives the total rate
• Inclinometer to measure the degrees of tilt.
  Well, doing all these types of measurements to prove that I is not perfect hole.
  And comment on them as I was with this
  
  Spanish Version:

Marcos de puertas con ajuste perfecto

Habitualmente me solicitan la elaboración e instalación de puertas para interiores de oficinas. Normalmente hay que hacer pequeños ajustes entre el marco y la pared ya que las paredes, la mayoría de las ocasiones no es posible dejarlas perfectas, así que se ajusta con cuñas de madera y se coloca una chambrana, o se rellena con yeso, Silicon o sellador acrílico.
Me he topado con una clienta exigente y con unos contratistas muy astutos. Los contratistas dicen que las puertas que elaboro están chuecas y que sus paredes están perfectas. Sin embargo no es así. Me he dado a la tarea de buscar la forma de verificar la supuesta exactitud de los marcos de las puertas.
El nivel de burbuja solamente nos indica si está nivelado o no.
El plomo, nos indica la verticalidad correcta entre dos puntos
La regla nos indica que tan plana esta la pared donde se colocara la pierna del marco.
El hilo nos indica nivelación de las aristas .
La escuadra nos indica que existe un angulo recto en las esquinas.
El nivel de manguera nos da el nivel total
Inclinómetro para medir los grados de inclinación.
Bueno, pues haciendo mediciones de todos estos tipos debo de demostrar que no está perfecto el hueco.
Ya les comentare como me fue con esto

This can be made easy

Clamps <div> Publish at Scribd or explore others: clamps woodworking </div>

De Workbench

Circular saw bench

De Workbench

Sawhorses (Burros)

De Workbench

Because i dont have a cilindrical steel, i use this rod screw. and i modify a little the design.

De Workbench

I have a lot of wood pallets, so I used to start the table. I glued all the wood together.

A small accident. By breaking a piece of wood with my hands.

All the wood boards

Pictures tonight with some lateral aggregates

Almost ready flattened

FFollowing is the plan of the table legs, generally expect a mixture of the following designs.

De Workbench

De Workbench

Almost finished

De Workbench

this is the label that brings the wood

De Workbench

My booking timber

De Workbench

What happens to us Mexicans in this category?
What about the MSN and Yahoo Groups?
What about members of groups?

It may not be as active as I would in all groups, but I am awaiting what happens. Another big problem is that messages from the group that are answered by mail yahoo going to junk mail classified as spam. In one of these emails I saw the topic of some bench presses than trying to get in mexico this practice in Chinese, not to mention the quality or professional tool that this cost by the heavens.
I will say what I think my words and disulpen beforehand: “I’m up to the mother that petty gringos and the petty Mexican government we have in misery tecnológica” But who knows? Mexicans we stress because we are creative, and we might not be so “chingon Irwin as” a screw-table made with screw rods, but will provide the same utility and will be available to us Mexicans.
When cree yahoo group and invited a member called “Accountant” read:
“I was not poru many groups carpentry, deveria focus on just one and have more participation, without splitting, which devilita.El be united us makes us strong and improving many things, like ideas and comments, experiences and learn all . Let us things. ”
And is quite right. Divagaciones on the issues, we do not have a clear objective we’ve added as we happen and we are in groups that sometimes we do not add anything.
Why not create something really serious, based on our experience and in books or magazines we read. Maybe not become the Mexican woodworking or … who knows, but that is my intention as from today. It was a bit of carpentry and somewhat like web page creation, and that an independent forum will give us more opportunities and capabilities of organization that a site yahoo or msn.
I think these forums are for us beginners learn many things that others can teach us, and I at least did not leave mine, but also the lack of organization in the group makes the information is scattered and want to give us nisiquiera read what is already posted. So my goal now is to improve what needs, gather information and with your help, which is that I will make a very site of the Mexican carpentry for the Mexican woodwork.