A word to the wise .....

  • Advertise with us
This blog is written by Oldtool | 10 entries so far

Latest Entry

Potential solution for end vise wracking

04-05-2017 09:28 PM by Oldtool | 1 comment »

While working on my current project of a TV Credenza, I had the need to clamp for the planing of molding on the front edge of my bench. As mentioned by many others on this site, my end vise was wracking, and I tried the usual solutions – wedge, spare pieces of wood, shims, etc., but found these to be somewhat of a pain in the neck. Thinking about it, I decided to use the far runner in some form of clamping procedure. I went to Lowe’s, secured a 7/8” dowel (the diameter of my vise guide pipe ), and a 3/4” copper pipe clamp: I decided on a dowel to prevent any possible marring the metal unit, and used the 3/4” copper clamp because copper (tube) is mea...

Read this entry »

Older Entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics