LumberJocks

Router Templates

  • Advertise with us
Blog entry by NormiteLou posted 07-20-2007 11:03 PM 2755 reads 0 times favorited 9 comments Add to Favorites Watch

Hi All, Template Master is a new product I have developed for making Ultra Precision Tiles called Tessellations.
Using the Template Master system, Tessellated Tiles and Borders can be cut in just a few minutes each.
A typical 25” diameter 3/4” thick Floor Medallion (as shown in the introduction video) can be cut out, Routered using Template Master , assembled and glued up in less than 3 1/2 hours.
Disclaimer: Of course, Please allow 24 hours for glue to dry before final finish!!

This is Excellent for a quick weekend project! You can build, one two or three a day easy!
Make them for yourself, give them as gifts, sell them (but please do not set up a factory)!

The Tiles or Tessellations can be incorporated into about any surface you can imagine ex.: Table Top, Inlay Medallion, Lazy Suzanne, Flooring, Wainscot…... Your imagination is the limit!

Please keep checking in on my Blog updates, as I will post mini videos on different projects that can be built with each Template Master pattern. Also, I will be introducing new Template Master patterns.
I am not mass producing Template Master at this time. But if you have a pattern you would like made, give me a holler!

Thanks for watching!
Lets make some saw dust!

-- Normite Lou



9 comments so far

View cajunpen's profile

cajunpen

14416 posts in 2789 days


#1 posted 07-22-2007 12:11 PM

Well, you’ve got my interest – but the video does not play. Please repost something that we can view. Went to your website and that doesn’t appear to be working either.

-- Bill - "Suit yourself and let the rest be pleased." http://www.cajunpen.com/

View WayneC's profile

WayneC

12300 posts in 2820 days


#2 posted 07-22-2007 03:25 PM

Video appears to be working this morning. It did not yesterday.

-- We must guard our enthusiasm as we would our life - James Krenov

View MsDebbieP's profile

MsDebbieP

18615 posts in 2884 days


#3 posted 07-22-2007 04:08 PM

that sure would make “accuracy” an easy thing to achieve!

-- ~ Debbie, Canada (https://www.facebook.com/DebbiePribeleENJOConsultant)

View NormiteLou's profile

NormiteLou

36 posts in 2695 days


#4 posted 07-22-2007 04:25 PM

I will pull out all the non essential stuff from this video and repost just the basics.
Ill uses the KISS theroy.
Are there alot of mac users out there? Should it be posted in .mov also?

-- Normite Lou

View Thos. Angle's profile

Thos. Angle

4438 posts in 2686 days


#5 posted 07-23-2007 06:21 PM

Interesting. I make templates from MDF and stick them down withdbl. sided tape. It would be great to have the aluminum templates if there was enough need for them. Really neat idea.

-- Thos. Angle, Jordan Valley, Oregon

View DataDoc's profile

DataDoc

12 posts in 2985 days


#6 posted 07-25-2007 01:59 AM

Nice idea. The video shows way too much routing, one example of attaching should be enough. Sound quits at 6:50.

-- DataDoc, North Carolina, www.craigscrafts.com

View NormiteLou's profile

NormiteLou

36 posts in 2695 days


#7 posted 07-25-2007 03:39 PM

Hi Data Doc, Thanks for the data input. I am currently cutting the video up into smaller chunks!

-- Normite Lou

View cajunpen's profile

cajunpen

14416 posts in 2789 days


#8 posted 07-26-2007 11:35 AM

Normite Lou you concept is interesting, I think, but you sound quits half way through – didn’t miss the music really, I would have liked to have seen less routing time and more assembly time. I would be helpful if you would have included some audio to explain the process and what the components were, as well as the prices of each piece – are there other patterns available, or are the two shapes shown the only two you need?

I think you have an interesting product, I just need a little better explanation of the process and cost – unless I missed something.

-- Bill - "Suit yourself and let the rest be pleased." http://www.cajunpen.com/

View NormiteLou's profile

NormiteLou

36 posts in 2695 days


#9 posted 07-26-2007 02:54 PM

Thanks cajunpen, I am working on it.
I work alone right now I am overwhelmed!

-- Normite Lou

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase